An explanation of how a good sawblade compares to a cheap sawblade

I strive to sell top quality products to compliment your Shopsmith.

With that in mind I am very picky about who supplies my products

After reading the detail below just ask yourself this question-

Does my £20 sawblade go though this much care during production?

A Mark V 510 Bench  

This offer is for a Power Pro Mark V 510 Item reference is Z

This is a Distributer built Mark V 510 system 

The following items have been fitted

Distributer build Power Pro headstock (2022)

Double tilt assembly modification (£685)

Premium Casters (£215)

510 tables (fully refurbished assembly)

one each 24 and 48 tooth TCT sawblades & arbors

30mm saw arbor

Velcro system sanding disks

Plus all the standard parts which come with a new Mark V 510 machine 

 This Shopsmith Mk V 510 Bench is is lovely well maintained condition with Bright chrome tubes and rails and all standard accessories

A complete Mark V 510 setup on behalf of a client with optional Bandsaw

EMAIL me for more information on how to purchase

This offer is for a Mark V 510 Item reference is 2A

I decided to give the headstock a full service on this unit Partly due to a niggle with the headstock locking mechanism. Once apart it seemed silly not to proceed and it is now upgraded to full H&S specification with new bearings and belts etc.

Buy this Mark V 510 and receive 2 FREE DVD's

556067 on how to Restore a Shopsmith MK V

556062 on Shopsmith Mk V Critical Alignments

This is a pre-owned machine taken in part exchange for a new Power Pro Mark 7

Casters have been fitted

PLEASE NOTE

If any items are missing they can be purchased as extras

 It has been fully tested and adjusted and will come with a ONE month warranty on all parts

A complete Mark V 510 setup on behalf of a client with optional Bandsaw

EMAIL me for more information on how to purchase

This offer is for a Mark V 510 Item reference is B4

Buy this Mark V 510 and receive 2 FREE DVD's

556067 on how to Restore a Shopsmith MK V

556062 on Shopsmith Mk V Critical Alignments

This is a pre-owned machine taken in to sell on behalf of client

The headstock has been started and run and will comply with Health & Safety standards

Casters have been fitted

PLEASE NOTE

This is a refurbished item and checked for parts and operation (painting will be up to you to do).

Standard items are included

Accessories can be purchased as extras

 It has been fully tested and adjusted and will come with a ONE month warranty on all parts

516368 Shopsmith Mk V 510 table insert for SAW (Polymer Plastic)

NO LONGER IN MANUFACTURE LAST FEW IN STOCK

Use this item if you need to run close to the insert edge with your sawblade. If you go too far you won't damage your sawblade teeth.

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US

51410004 Shopsmith Mk V 510 table insert for SAW (Alloy)

If you have damaged your original table insert this is a new Aluminium alloy insert replacement

Pre-Cut Insert (Aluminum alloy) For 505, 510, 520/Pro Fence.
Will not work on the M2, M7, 500 or ER.

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US

555500 MARK V 500 Blank Table Saw Insert    

  Our special Table Inserts give you maximum work piece support and operator safety. Now you can create your own narrow or wide kerf slots when sawing, without dulling your saw blades. Will not fit ER, M2, M7, 510.

Mark V Model 500 only.

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US

555518 Mark 7 and MARK V 505-510-520 BlankTable Insert        

Blank Polymer Zero Clearance Table Insert --- for use when making through-cuts with your Mark 7 or Model 505, 510 or 520 Pro Fence MARK V – and you’re planning to use your Upper Saw Guard for optimal safety

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US

MARK V 510 Blank Table Saw Insert

555501 Item D in the picture    

  Our special Table Inserts give you maximum work piece support and operator safety. Now you can create your own narrow or wide kerf slots when sawing, without dulling your saw blades. Will not fit ER, M2, M7, 500.

Mark V Models 505 510/520 Mk 7 only.

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US

505700 Mitre Gauge assembly without Safety Grip

(514374 was the former catalogue number)

The Shopsmith Miter Gauge forms the basis for this complete system of work-holding and guiding devices. It offers a built-in scale that reads from 0° to 30° left and right... an adjustable “zeroing” pointer that lets you measure down to 1° increments... adjustable auto-stops at 0° and 45° in both directions... and a large, knurled knob to lock the gauge into position. A 1/4" hole runs through the face (left-to-right) for inserting the optional stop rod. 

Will not fit ER.

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US