48 Tooth 1¼" arbor 10 inch TCT Sawblade

Tested and cuts well

Many re-sharpenings left on teeth

A top quality UK sourced 250mm (10 inch) sawblade with imperial dimensions for the centre arbour of 1 ¼"

This saw blade is 10 inch (250mm) outside diameter 48Tooth TCT (Tungsten Carbide Tip)

Kerf on this blade is 3.2mm 

 use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a good quality blade.  

An explanation of how a good sawblade compares to a cheap sawblade

I strive to sell top quality products to compliment your Shopsmith.

With that in mind I am very picky about who supplies my products

After reading the detail below just ask yourself this question-

Does my £20 sawblade go though this much care during production?

48 Tooth 1¼" arbor 10 inch TCT Sawblade

A top quality UK sourced 250mm (10 inch) sawblade with imperial dimensions for the centre arbour of 1 ¼"

This saw blade is 10 inch (250mm) outside diameter 48Tooth TCT (Tungsten Carbide Tip)

Kerf on this blade is 3.2mm 

 use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a good quality blade.  

555001 50 tooth TCT (Tungsten Tipped Carbide)

Tested and cuts well

Many re-sharpenings left on teeth

Sold by Shopsmith prior to 2008

A previously owned quality 10 inch sawblade with imperial dimensions for the centre arbour of 1 ¼"

This saw blade is 10 inch outside diameter 50Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a good quality blade.  

555608 MARK V 510/520 5/8" Saw Arbor with 30mm conversion

Shopsmith Saw Blade Arbor used for mounting 30mm blades to models

Mark 7, Mark V 505-510-520

To mount Blades with a 30mm centre hole diameter

 NOTE: Not to be used with DADO blades

This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items in stock

Shopsmith Saw Blade Arbor used for mounting 30mm blades to models

Mark V 500 ONLY-------- NOT for 510 or 520

There is stock avavilable once you have confirmed your Mark V model

DO NOT MAKE PAYMENT UNTIL YOU HAVE DONE THIS 

To mount Blades with a 30 mm centre hole diameter

 NOTE: Not to be used with DADO blades

 If you have purchased the 30mm arbour then this blade is for you

I recommend this blade for hardwood and plywood

A top quality UK sourced 250mm sawblade with dimensions for the centre arbour of 30mm

Kerf on this blade is 3.2mm 

This saw blade is 250mm outside diameter 60Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a good quality blade.  

 If you have purchased the 30mm arbour then this blade is for you

I recommend this blade for for worktop, panels and Perspex

A top quality UK sourced 250mm sawblade with dimensions for the centre arbour of 30mm

Kerf on this blade is 3.2mm 

This saw blade is 250mm outside diameter 80Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a good quality blade.  

42 tooth TCT (Tungsten Tipped Carbide)

This is a pre owned Blade which will need  re-sharpening in the future but cuts well currently 

Sold by Shopsmith prior to 2008

A previously owned quality 10 inch sawblade with imperial dimensions for the centre arbour of 1 ¼"

This saw blade is 10 inch outside diameter 42Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a good quality blade.  

TCT Sawblade Sharpening Service

After a lot of trial and error over the years I have now found a company who do a good job of sharpening my blades. It is sensless paying out for a good quality blade only to have it ruined by shoddy sharpening. If this has been your experience then send your blades to the company below and they will get them sharpened properly for you.

V & J Davies Saw Services
Unit E, Prout Ind Estate
Point Road
Canvey Island
SS8 7TJ
sales@vjdaviessaws.co.uk
01268 684644