555462-BF Shopsmith Speed Increaser EX DEMO 

This item will include as a bonus the following items:-

555463 Speed increaser spindle x 2 

3 x Shaper cutters 505618-505938-555589

This will allow you to start using this item immediately

With the introduction of the Power Pro I no longer demo this product

ONE unit available Minimal use from new 

  Increase Your Mark V's Speed to 10,000 rpm for Routing and Shaping -
with the Shopsmith Speed Increaser

A chance to own this versatile tool at below full retail price

A Mark V 510 Bench  

This offer is for a Power Pro Mark V 510 Item reference is Z

This is a Distributer built Mark V 510 system 

The following items have been fitted

Distributer build Power Pro headstock (2022)

Double tilt assembly modification (£685)

Premium Casters (£215)

510 tables (fully refurbished assembly)

one each 24 and 48 tooth TCT sawblades & arbors

30mm saw arbor

Velcro system sanding disks

Plus all the standard parts which come with a new Mark V 510 machine 

 This Shopsmith Mk V 510 Bench is is lovely well maintained condition with Bright chrome tubes and rails and all standard accessories

555422 Shopsmith Power Station  

Due for collection by me shortly 

ENQUIRE NOW AS I MAY BE ABLE TO DELIVER

    The Shopsmith Power Station® Delivers Efficiency and Space-Saving    Versatility 

This unit is very clean and in full working order.

EMAIL me for more information on how to purchase

Optional extra is a set of casters to this unit to make it very easy to move 

    Shopsmith Power Station  

    Power Multiple Tools and Save Space, too

    These units have been discontinued by Shopsmith, so not available new

A complete Mark V Headstock 2B

Fully running and is good condition 

This is from a pre-owned machine taken in part exchange 

PLEASE NOTE

This is NOT a refurbished item.

If any items are missing they can be purchased as extras

 It has been partially tested and adjusted and will come with a ONE month warranty on all parts

Refurbished Mark V headstock-Latest UK specification

NO TRADE IN REQUIRED

Keep your old headstock as backup

The unit supplied will have been fully stripped and overhauled with new parts fitted 

The unit incorporates the latest on/off switch design with NVS* and dust protection

The unit will have been tested to comply with current Health and Safety standards

* NVS ( no volt supply) safety feature

Headstock unit Shopsmith Mark V 522209 design Refurbishment

Here is another option headstock 

NO TRADE IN REQUIRED

Keep your old headstock as backup

A complete headstock fully serviced with testing

The Base unit supplied has been fully stripped and overhauled with new parts fitted where required.

New belts with bearings for drive and quill are usual fitments

The actual service schedule will come with this unit.

Ready to run and give many years of service

The unit will have been tested to comply with 1995 Health and Safety standards

505700 Mark V 500 Mitre Gauge assembly without Safety Grip 

(514374 was the former catalogue number)

.

The Shopsmith Miter Gauge forms the basis for this complete system of work-holding and guiding devices. It offers a built-in scale that reads from 0° to 30° left and right... an adjustable “zeroing” pointer that lets you measure down to 1° increments... adjustable auto-stops at 0° and 45° in both directions... and a large, knurled knob to lock the gauge into position. A 1/4" hole runs through the face (left-to-right) for inserting the optional stop rod. 

Will not fit ER.

505700 Mark V 510 Mitre Gauge assembly with 505625 Safety Grip USED

(514374 was the former catalogue number)

Complete assembly will fit Mark V 500-505-510-520 and Mark 7

Used Condition is "A" full working order slight damage

.

The Shopsmith Miter Gauge forms the basis for this complete system of work-holding and guiding devices. It offers a built-in scale that reads from 0° to 30° left and right... an adjustable “zeroing” pointer that lets you measure down to 1° increments... adjustable auto-stops at 0° and 45° in both directions... and a large, knurled knob to lock the gauge into position. A 1/4" hole runs through the face (left-to-right) for inserting the optional stop rod. 

Will not fit ER.

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US

513964  Headstock Electric  Motor A.O Smith  240v Used 

This item is the basic 240 volt motor and is pre used It has been Fully tested for operation.

It comes with fully Refurbished motor sheaves

Spring tension has been checked and assembled

All fully assembled and ready to bolt straight in

Stock here is the Type 1 fitted to machines usually up to 1892

All motors have been fully tested and come with THREE month limited warranty

NO SPARES AVAILABLE FOR THIS DESIGN MOTOR

Fully assembled as seen in the picture and ready to fit

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

All specialist parts orders have an admin fee in addition to the parts price 

You are encouraged to phone for assistance in order to get the right part.

Please use the link under CONTACT US