> Categories>Lathe Accessories

Lathe Accessories

Woodturning and associated Lathe tools. A mix of NEW and USED specialist and standard items 

• Select to compare

  

  Thickness Gauge

  518991 Thickness GaugeThickness gauge is a simple, direct reading thickness caliper with an expanded scale which measure from 1/32" to 2" (0-55mm). Use the tool as a go/no-go gauge. This new tool completely eliminated the tedious and constant measuring associated with planing and surfacing..

  £ 17,99
  Available

  Add to basket View

• Select to compare

  

  Solid Steel Indexed Lathe...

  Woodturning Accessory This Solid Steel Indexed Lathe Faceplate has a 5/8 inch bore centre fixing for the Shopsmith lathe range. Solid billet steel high quality See pictures for type and condition A very useful item to have in your tool arsenal Many of these items are NEW but are sold as USED Snap up these Bargains quickly as there is usually only one item...

  £ 55,95
  Available

  Add to basket View

• Select to compare

  

  Robert Sorby 2MT to 1MT holder

  Robert Sorby 2MT to 1MT holder Easily add MT1 taper tools to your Shopsmith MT2 Taper Tailstock    Better centring, better holding power Designed by a woodturner for woodturners Produced by Robert Sorby - quality assured  A great design to improve centering at the tail stock end of your lathe

  £ 8,65
  Available

  Add to basket View

• Select to compare

  

  1MT tool tip holder with parting...

   1MT tool tip holder with parting tool This is a steel Cutter holder with removeable tip and needs a 2MT to 1MT holder in order to fit your Shopsmith MT2 Taper Tailstock Brand new item of unknown manufacture Better centering, better holding powerDesigned by a woodturner for woodturners    A great design to improve centering at the tail stock end of...

  £ 31,25
  Available

  Add to basket View

• Select to compare

  

  Lathe Arbor item A Special item...

   505715a Lathe Arbor item special 4 prong spur centre guide  This item is similar to 505715 except that the centre guide is removeable.       MARK V Lathe Drive Center               Attaches the Headstock to the work piece and turns the stock during lathe operations. Has extremely sharp spurs for easy driving into the work piece. Held on 5/8" spindle with...

  £ 43,95
  Available

  Add to basket View

• Select to compare

  

  Lathe Arbor item A Standard item...

  505715 Lathe Arbor item A Standard item 4 spur centre drive      MARK V Lathe Drive Center               Attaches the Headstock to the work piece and turns the stock during lathe operations. Has extremely sharp spurs for easy driving into the work piece. Held on 5/8" spindle with a Set-screw

  £ 48,95
  Available

  Add to basket View

• Select to compare

  

  Lathe Arbor item A Standard item...

  505715 Lathe Arbor item A Standard item 4 spur centre drive      MARK V Lathe Drive Center               Attaches the Headstock to the work piece and turns the stock during lathe operations. Has extremely sharp spurs for easy driving into the work piece. Held on 5/8" spindle with a Set-screw

  £ 27,50
  Available

  Add to basket View

• Select to compare

  

  Lathe Screw Center

  505601 Lathe Screw Center A special center designed for turning small diameter work pieces from 1" to 5" long without using the Tailstock center. NEW LOWER PRICING FOR 2022

  £ 47,95
  Available

  Add to basket View

• Select to compare

  

  Lathe Arbor item B Standard cup...

  505716 Lathe Arbor item B Standard cup centre with #2 Morse Taper NEW LOWER PRICING        MARK V Lathe Drive Center This item would have come standard with your Mk V but they have a tendancy to get lost    Attaches the Headstock to the work piece and turns the stock during lathe operations. Has extremely sharp spurs for easy driving into the work piece....

  On sale!

  £ 29,95
  Available

  Add to basket View

• Select to compare

  

  Lathe Arbor item B Standard cup...

  505716 Lathe Arbor item B Standard cup centre with #2 Morse Taper -REFURBISHED     MARK V Lathe Drive Center This item would have come standard with your Mk V but they have a tendancy to get lost    Attaches the Headstock to the work piece and turns the stock during lathe operations. Has extremely sharp spurs for easy driving into the work piece. Held on...

  On sale!

  £ 17,50
  Available

  Add to basket View

• Select to compare

  

  Tailstock Chuck Arbor

   505603 Tailstock Chuck Arbor           NEW LOWER PRICING     Tailstock Chuck Arbor lets you easily drill and accurately position holes in the ends of work pieces. Simply slip the chuck over the end of the arbor and tighten the set-screw. Fits any #2 Morse Taper..  

  £ 36,50
  Available

  Add to basket View

• Select to compare

  

  Lathe Live cup Centre with No 2...

                           505602 Live cup centre NEW LOWER PRICING   Lathe Live Center provides for smooth, friction-free turning without messy lubricants Premier-quality Lathe Live Center features precision ball bearing construction for friction-free tip rotation without the need for beeswax or similar lubricants. This item also has a replaceable tip...

  On sale!

  £ 66,95
  Available

  Add to basket View

• Select to compare

  

  Lathe Live Centre replacement tip

  501430 is the replaceable tip for your live centre. These are easily damaged if dropped onto a concrete floor IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to...

  £ 9,95
  

  View

• Select to compare

  

  Lathe Live Centre spacer extention

  514704 is the spacer extention for your 505602 live centre. This item allows turning of short items by extending the live center closer to the headstock. IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be...

  £ 36,95
  Available

  Add to basket View

• Select to compare

  

  Versa lathe chuck replacement body

  Versa replacement lathe chuck BODY only The item comprises of the Chuck body There are NO jaws There are NO chuck spanners If the threads on your unit have been damaged this will be a replacement and keep your investment in the remainder of your kit.

  On sale!

  £ 30,00
  Available

  Add to basket View

• Select to compare

  

  Lathe Auger TLA107

  Woodworking tool USED item See pictures for type and condition Lathe Auger TLA107 manufacturer of this item unknown You will need a HOLLOW Live centre to use this You can usually add small items to any standard order for NO EXTRA shipping if under two kilos Many of these items are NEW but are sold as USED Snap up these Bargains quickly as there is usually...

  £ 22,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Pen Turning Mandrel

  Shopsmith Pen Turning Mandrel NEW PRODUCT  Long time awaited product. Forward order this onto my next consignment

  £ 39,95
  Available

  Add to basket View

• Select to compare

  

  Pen Turning Mandrel saver

  Pen Turning Mandrel saver UK Product NEW PRODUCT FOR 2022   Long time awaited product. This item will support your pen at the tailstock end when on the mandrel 556216

  £ 44,95
  Available

  Add to basket View

• Select to compare

  

  USED Shopsmith Universal Lathe...

  555868 Shopsmith Universal Lathe Tool Rest complete package in as new condition Comes complete with latest tool rest adjustment levers  Pack includes 555811 universal rest 555312 "S" shape tool rest 555313 "L" shape or 90° tool rest 555314 "4" short tool rest Shipping cost is high due to weight  

  £ 445,00
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Universal Lathe Tool...

  Shopsmith Universal Lathe Tool Rest complete package 555868 is a PACK product. This means it is made up from a combination of seperate items Pack includes 555811 universal rest 555312 "S" shape tool rest 555313 "L" shape or 90° tool rest 555314 "4" short tool rest Shipping cost is high due to weight  

  £ 600,00
  Available

  Add to basket View

• Select to compare

  

  8-inch Lathe Tool Rest

  This is the standard 8 inch tool rest. This is the workhorse tool rest in your kit

  £ 36,95
  Available

  Add to basket View

• Select to compare

  

  S Shape or curved Lathe Tool Rest

  NEW LOWER PRICING Unique "S" shape lets you reach up to 4" deep into a bowl, and conforms to its outside shape.    

  £ 61,95
  Available

  Add to basket View

• Select to compare

  

  L Shape or 90 degree Lathe Tool...

  NEW LOWER PRICING 90 Degree Tool Rest accommodates both scraping and shearing techniques  

  £ 43,95
  Available

  Add to basket View

• Select to compare

  

  4-inch Lathe Tool Rest

  NEW LOWER PRICING Use to get in closer to deep coves on spindles or bowls and to reach farther into bowls when hollowing.

  £ 43,95
  Available

  Add to basket View

• Select to compare

  

  Lathe Tool rest 10mm-3/8"...

  Woodturning Accessory This item will require a holder to use with a Shopsmith lathe toolpost  but will fit many other lathes which accommodate a 3/8” toolpost holder.  See pictures for type and condition A very useful item to have in your tool arsenal Many of these items are NEW but are sold as USED Snap up these Bargains quickly as there is usually only...

  £ 12,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Lathe Faceplate 3 3/4"...

  505590 3¾" Lathe Faceplate This item is the smaller of the two faceplates available Each of these 5/16” thick cast faceplates attaches quickly to your MARK V’s spindle with a single setscrew.    

  £ 59,95
  Available

  Add to basket View

• Select to compare

  

  Small Faceplate ALLOY 95mm for...

  Woodturning Accessory See pictures for type and condition A very useful item to have in your tool arsenal Many of these items are NEW but are sold as USED Snap up these Bargains quickly as there is usually only one item per listing When that one is gone that's it folks !!

  £ 29,95
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Lathe Faceplate 6"...

  505591 6" Lathe Faceplate This item is the larger of the two faceplates available Each of these 5/16” thick cast faceplates attaches quickly to your MARK V’s spindle with a single setscrew.    

  £ 69,95
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Speed reducer

  555428 Shopsmith Speed Reducer This is a lower speed cheaper solution for those of us without a Power Pro at 250 rpm !! price quoted is for stock held in the UK.   Slow Your Mark V To 100 RPM For Drilling, Sanding or Turning...   With Shopsmith's Amazing Speed Reducer    

  £ 599,99
  Available

  Add to basket View

• Select to compare

  

  Large Faceplate ALLOY 6 inch for...

  Woodturning Accessory See pictures for type and condition A very useful item to have in your tool arsenal Many of these items are NEW but are sold as USED Snap up these Bargains quickly as there is usually only one item per listing When that one is gone that's it folks !!

  £ 39,95
  Available

  Add to basket View