> Shopsmith Products>Drilling

Drilling

For a selection of drilling chucks and accessories for your Shopsmith.

• Select to compare

  

  Precision Drill Chuck and Key

  This high-quality geared drill chuck is designed to work with your Mark 7 / Mark V... or any drill press with a 5/8" quill shaft. Easily accepts and grasps any size drill bit between .020" and 1/2"

  £ 90,95
  Available

  Add to basket View

• Select to compare

  

  Jacobs K-30 ½" Threaded Chuck...

   Jacobs K-30 ½" Threaded Chuck and key Solid Half inch chuck made by a leading manufacturer NEW but Sold as USED so a bargain to be had  A nice easy to use little item. A very useful item but surplus to my collection 

  £ 9,95
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 5 Foot...

   521942 pair MARK V 510/520 5 Foot Connector Tubes  This listing is for a pair of these tubes These tubes are problematic for shipping please contact me   Designed to provide the ultimate stability and accuracy in table support and alignment. Slides into 510 worktable and extension tables to help support floating extension tables. Will not work on Mk V 500.

  £ 95,99
  Available

  Add to basket View

• Select to compare

  

  Pocket Hole Jig kit

   Pocket Hole Jig kit Produced by UJKThe Basics  Make strong hidden joints, fast and easily produced Furniture making, kitchen fitting, strong frames and carcases Bench mounted or portable with extraction outlet The jig aligns timber to drill angled holes Use for a wide range of material thickness 12-36mm Clear metric scales

  £ 145,99
  Available

  Add to basket View

• Select to compare

  

  Hold Down Kit made by Tilgear

  Special Components for Building Shop-Made Jigs & Fixtures Hold Down Kit made by Tilgear Band new  With individual hold down clamps costing £8 to £18 this kit is fabulous value Easy to install on the Incra design rails With the addition of 514491 sliding T-Nuts you can also use on your Shopsmith  Hold down on all drilling operation for perfect...

  £ 29,99
  Available

  Add to basket View

• Select to compare

  

  Mark V 505 & 510 Rip Fence...

  556421 Mark V 505-510 Rip Fence Extension Enhance your fence system with this latest idea            This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 119,85
  

  Pre Order onto my next consignment from Ohio if stock is zero View

• Select to compare

  

  Mark 7 or Mark V 520 Rip Fence...

  556420 Mark 7/Mark V 520 Rip Fence Extension  Orders taken on this item with delivery arranged when in stock.  The price shown is for ex stock Delivery.   If you want one urgently contact me for direct shipping from the manufacturer to you.    Direct orders will incur added shipping charges     One of these is always in stock for viewing and...

  £ 141,99
  

  Pre Order onto my next consignment from Ohio if stock is zero View

• Select to compare

  

  Thickness Gauge

  518991 Thickness GaugeThickness gauge is a simple, direct reading thickness caliper with an expanded scale which measure from 1/32" to 2" (0-55mm). Use the tool as a go/no-go gauge. This new tool completely eliminated the tedious and constant measuring associated with planing and surfacing..

  £ 15,75
  Available

  Add to basket View

• Select to compare

  

  Spare Key for Mark V Precision...

  Spare Key for Mark V Precision Drill Chuck if you have lost yours there is no need to struggle without one at this low price

  £ 9,95
  Available

  Add to basket View

• Select to compare

  

  3 Lever Drill Press Quill Handle

  3 Lever Drill Press Quill Handle (Not for 10er) 3-Lever Drill Press Quill Handle for More Leverage, Control and Convenience  

  £ 47,99
  Available

  Add to basket View

• Select to compare

  

  Quick-Indexing Quill Feed Handle...

  Quick-Indexing Quill Feed Handle(Basic Two-Piece Kit) Meet the All-New Time-Saver - Quick-Index Quill Feed Handle 10-Position Quick-Index Quill Feed Handle Save Time & Work When Re-positioning Your Shopsmith's Quill Feed Handle

  £ 56,85
  Available

  Add to basket View

• Select to compare

  

  Quick-Indexing Quill Feed Handle...

  Quick-Indexing Quill Hub Adapter523070 (Hub adapter) Upgrade your 556441 to operate on either side of your Quill Meet the All-New Time-Saver - Quick-Index Quill Feed Handle 10-Position Quick-Index Quill Feed Handle Save Time & Work When Re-positioning Your Shopsmith's Quill Feed Handle

  £ 28,50
  Available

  Add to basket View

• Select to compare

  

  Flip-Up EuroGuard

  Shopsmith Euroguard Flip-Up, Telescoping Safety Guard 522008 Euroguard Shield Extends From2-5/8" To4-1/2"High EuroGuard delivers fast, hassle-free tool changeovers,improved dust collection efficiency and added workshop safety !

  £ 42,65
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Gas-Spring...

   Shopsmith Gas-Spring Table-Raiser                    New Gas Spring Table-Raiser Makes Easy Work Of Drill Press Table Lifting And Lowering. We are none of us getting any younger and this gadget makes raising your Shopsmith into drilling mode an absolute doddle, and as a bonus it's not a lot of money!!

  £ 89,65
  Available

  Pre Order onto my next consignment from Ohio if stock is zero Add to basket View

• Select to compare

  

  Quick-Acting Combination Bench...

       If you're a Shopsmith owner, you've probably already figured out that having a great drill press vise could be a BIG help for holding small workpieces while you bore holes, rout mortises and perform other operations with your Shopsmith set-up in vertical drill press mode.     

  £ 84,85
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Gas-Spring...

   Shopsmith Gas-Spring Table-Raiser                    New Gas Spring Table-Raiser Makes Easy Work Of Drill Press Table Lifting And Lowering We are none of us getting any younger and this gadget makes raising your Shopsmith into drilling mode an absolute doddle, and as a bonus it's not a lot of money!!

  £ 93,99
  Out of stock please email for updates

  Pre Order onto my next consignment from Ohio if stock is zero Add to basket
  View

• Select to compare

  

  Tailstock Chuck Arbor

   505603 Tailstock Chuck Arbor                   Tailstock Chuck Arbor lets you easily drill and accurately position holes in the ends of work pieces. Simply slip the chuck over the end of the arbor and tighten the set-screw. Fits any #2 Morse Taper..  

  £ 32,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith 5/8" Keyless Drill Chuck

  Delivery is normally from the manufacturer and is shipped directly to you. The price shown includes all import duties, taxes, delivery and VAT.  One of these is always in stock for viewing and demonstration, just give me a call. Please read our Direct Sales terms for details    Shopsmith 5/8" Keyless Drill Chuck Helps You Work More Efficiently and...

  £ 198,25
  Available

  Add to basket View

• Select to compare

  

  No 2 Morse Taper Keyless Drill...

     No 2 Morse Taper Keyless Drill Chuck Helps You Work More Efficiently and Handle Larger Bits If you've always wanted a drill chuck that could hold larger bits and let you switch from size-to-size quickly without fiddling with a chuck key, this mammoth, three-and-a-half-pound beast is your answer !   

  £ 185,25
  Available

  Add to basket View

• Select to compare

  

  Telescoping Table Support Leg

  Telescoping Leg Provides Added Table Rigidity When Hollow Chisel Mortising or Performing Other Heavy Workpiece Operations 555627 Telescoping Table Support Leg

  £ 55,25
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Telescoping Leg

  514529 MARK V 510/520 Telescoping LegOne quick twist easily adjusts the telescoping legs for simple, accurate table height positioning. Will not work on Mk V 500.

  £ 42,25
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Telescoping...

  514520 MARK V 510/520 Telescoping Leg T jointOne quick twist easily adjusts the telescoping legs for simple, accurate table height positioning. Will not work on Mk V 500.

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Connector 2...

   514439 MARK V 510/520 Connector 2 foot Tube   Designed to provide the ultimate stability and accuracy in table support and alignment. Slides into 510 worktable and extension tables to help support floating extension tables. Will not work on Mk V 500.

  £ 17,50
  Available

  Add to basket View

• Select to compare

  

  Mitre Gauge Stop Rod

  Mitre Gauge Stop Rod 505629 Mitre Gauge Stop RodWill not fit ER. Handy for cross-cutting pieces to identical length, sanding and drilling. The stop rod is used to cut several work pieces to the same length without repeated measurements..

  £ 33,25
  Available

  Add to basket View

• Select to compare

  

  Shopsmith T-Track Fixing kit

  521787 Shopsmith T-Track Fixing kit Use with your Utitlity Light (as shown), Vacuum utility extention or Stayput vacuum This special utility hardware kit includes a special bracket for mounting it quickly to the various T-Tracks on your Mk V. Fit it to the top of your Mark 7 or Mark V's rip fence or the T-Slots in your work table surface (Mark 7 and...

  £ 35,45
  Available

  Add to basket View

• Select to compare

  

  Dust collection vacuum extention

   555582 Dust collection Utility Vaccum Extension       A great dust collection pickup that features a flexible gooseneck that attaches to your machines to hold a pick-up in position... at the source of your dust production problem. It's a great product and is highly recommended. Use this product with 521787 Utility kit  

  £ 74,99
  Available

  Add to basket View

• Select to compare

  

  Fence Stop Track System MK V 510

  Special Components for Building Shop-Made Jigs & Fixtures 555807 Flip-Up Rip Fence Stop for your Mk V 510 (Make sure you select the correct model) Flip-Up Rip Fence Stop ensures repeatibility for a variety of operations The perfect accessory for creating multiple stopped dadoes, grooves, molding bansaw cuts & repetitive drilling and routing...

  £ 69,99
  Available

  Add to basket View

• Select to compare

  

  Fence Stop Track System MK V 520

  Special Components for Building Shop-Made Jigs & Fixtures 555808 Flip-Up Rip Fence Stop for your Mk V 520 (Make sure you select the correct model) Flip-Up Rip Fence Stop ensures repeatibility for a variety of operations The perfect accessory for creating multiple stopped dadoes, grooves, molding bansaw cuts & repetitive drilling and routing...

  £ 69,99
  Available

  Add to basket View

• Select to compare

  

  Additional Fence Stop MK V 520

  Special Components for Building Shop-Made Jigs & Fixtures 52170802 Addition Flip-Up Fence Stop for your Mk V 520 (Make sure you select the correct model) This is an addition to your 555807/8 kit shown below   The perfect accessory for creating multiple stopped dadoes, grooves, molding bandsaw cuts & repetitive drilling and routing operations.      

  £ 44,80
  Available

  Add to basket View

• Select to compare

  

  Additional Fence Stop MK V 510

  Special Components for Building Shop-Made Jigs & Fixtures 52170801 Addition Flip-Up Fence Stop for your Mk V 510 (Make sure you select the correct model) This is an addition to your 555807/8 kit shown below   The perfect accessory for creating multiple stopped dadoes, grooves, molding bandsaw cuts & repetitive drilling and routing operations.      

  £ 44,80
  Available

  Add to basket View