> Shopsmith Products>Sawing

Sawing

A full range of accessories for sawing on your Shopsmith

A full range of accessories for sawing on your Shopsmith

Don't forget to visit the UK Products page for more items in this catagory

More

• Select to compare

  

  Sawblade Production

  An explanation of how a good sawblade compares to a cheap sawblade I strive to sell top quality products to compliment your Shopsmith. With that in mind I am very picky about who supplies my products After reading the detail below just ask yourself this question- Does my £20 sawblade go though this much care during production?

  View

• Select to compare

  

  Shopsmith Mk V 510 table insert...

  516368 Shopsmith Mk V 510 table insert for SAW (Polymer Plastic) NO LONGER IN MANUFACTURE LAST FEW IN STOCK Use this item if you need to run close to the insert edge with your sawblade. If you go too far you won't damage your sawblade teeth.

  On sale!

  £ 25,00
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 510 table insert...

  Shopsmith Mk V 510 table insert for SAW (Alloy) If you have damaged your original table insert this is a new Aluminium alloy insert replacement Pre-Cut Insert (Aluminum alloy) For 505, 510, 520/Pro Fence. Will not work on the M2, M7, 500 or ER.  

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith MARK V 500 Blank Table...

  MARK V 500 Blank Table Saw Insert       Our special Table Inserts give you maximum work piece support and operator safety. Now you can create your own narrow or wide kerf slots when sawing, without dulling your saw blades. Will not fit ER, M2, M7, 510. Mark V Model 500 only.

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  Mark 7 and MARK V 505-510-520...

  Mark 7 and MARK V 505-510-520 BlankTable Insert                 Blank Polymer Zero Clearance Table Insert --- for use when making through-cuts with your Mark 7 or Model 505, 510 or 520 Pro Fence MARK V – and you’re planning to use your Upper Saw Guard for optimal safety  

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith MARK V 510 Blank Table...

  MARK V 510 Blank Table Saw Insert 555501 Item D in the picture       Our special Table Inserts give you maximum work piece support and operator safety. Now you can create your own narrow or wide kerf slots when sawing, without dulling your saw blades. Will not fit ER, M2, M7, 500. Mark V Models 505 510/520 Mk 7 only.

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mitre Gauge without...

  505700 Mitre Gauge assembly without Safety Grip NEW LOWER PRICING FOR 2022  (514374 was the former catalogue number) The Shopsmith Miter Gauge forms the basis for this complete system of work-holding and guiding devices. It offers a built-in scale that reads from 0° to 30° left and right... an adjustable “zeroing” pointer that lets you measure down to 1°...

  £ 92,95
  Available

  Add to basket View

• Select to compare

  

  Mitre Gauge Safety Grip

  505625 Mitre Gauge Safety Grip NEW LOWER PRICING FOR 2022  Attaches quickly to back and top of Miter Gauge for pistol grip convenience. One pound of squeeze pressure on the grip exerts five pounds of hold-down pressure on the foot.  Will not fit ER.

  £ 67,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Adapter Plate For...

  Attach Your Shop-Made Jigs & Fixtures (or any of Shopsmith's Miter-Gauge-Mounted Accessories To Your Incra v120 Miter Gauge With This Versatile Adapter Plate  

  £ 29,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Cross-Cut Sliding...

  555535a Shopsmith Cross-Cut Sliding Table kit NEW LOWER PRICING FOR 2023 Enjoy the cutoff convenience and precision of a radial arm saw with Shopsmith's amazing Cross-Cut Sliding Table System This item will come with both the sliding table 555535 and the auxillary table 555526 as a package

  £ 379,99
  Available

  Add to basket View

• Select to compare

  

  MiterSet Standard (Shopsmith)

  MiterSet Jig to Quickly Make precise Angles and Perfect Mitered Corners! NEW LOWER PRICING FOR 2023 Newly imported you can be among the first to have this exciting new product One of the most common headaches in woodworking is making accurate miter cuts. Whether you're creating unique segmented wood pieces, constructing a picture frame, or doing high-end...

  £ 139,95
  Available

  Add to basket View

• Select to compare

  

  MiterSet Segments (Shopsmith)

  MiterSet Segment Jig to Quickly Make Angled Segments and Perfect Mitered Corners! NEW LOWER PRICING FOR 2023 Newly imported you can be among the first to have this exciting new product One of the most common headaches in woodworking is making accurate miter cuts. Whether you're creating unique segmented wood pieces, constructing a picture frame, or doing...

  £ 139,95
  Available

  Add to basket View

• Select to compare

  

  MiterSet Standard Jig and...

  MiterSet Standard Jig and MiterSet Segment Jig duo NEW LOWER PRICING FOR 2023 and Quickly Make Angled Segments and Perfect Mitered Corners! Buying the two types together will save you some money Newly imported you can be among the first to have this exciting new product PLEASE NOTE IF YOU DO NOT OWN A SHOPSMITH MACHINE THIS ITEM WILL NOT FIT One of the...

  On sale!

  £ 250,00
  Available

  Add to basket View

• Select to compare

  

  Riving Knife For Non-Through Cuts

  556223 Riving Knife For Non-Through Cuts The riving knives on upper saw guard systems are positioned at the back side of the saw blade and are designed to prevent the saw kerf from closing onto the teeth of the rotating blade once the cut has been made.   When this kerf closing occurs, the potential for a dangerous kickback is increased significantly....

  £ 39,95
  Available

  Add to basket View

• Select to compare

  

  Cross-Cutter for Mark V Models...

  The Shopsmith Cross-Cutter 556464 Cross-Cutter for Mark V Models 510, 505 and 500 NEW LOWER PRICING FOR 2022Create Beautiful Picture Frames, Tables, Custom Boxes, Furniture and more! Mark V 500 owners Please note you need to have the 555646 upgrade fence to use this item Mark V 520 owners Please note you need to order the 556466

  £ 48,50
  Available

  Add to basket View

• Select to compare

  

  Cross-Cutter for MARK 7 and Mark...

  The Shopsmith Cross-Cutter 556466 Cross-Cutter for MARK 7 and Mark V Model 520 NEW LOWER PRICING FOR 2022Create Beautiful Picture Frames, Tables, Custom Boxes, Furniture and more! Mark V 500 owners Please note you need to have the 555646 upgrade fence and order 556464 Mark V 510 owners Please note you need to order the 556464

  £ 48,50
  Available

  Add to basket View

• Select to compare

  

  24 Tooth 1¼" arbor 10 inch TCT...

  A top quality UK sourced 10 inch (250mm) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 24 Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for ripping down the grain of your stock timbers. It gives a clean smooth finish ready for final sanding.  This blade runs...

  On sale!

  £ 59,95
  Available

  Add to basket View

• Select to compare

  

  48 Tooth 1¼" arbor 10 inch TCT...

  A top quality UK sourced 250mm (10 inch) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 48Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a...

  £ 70,95
  Available

  Add to basket View

• Select to compare

  

  MARK V 500 1-1/4" Saw Arbor

    Shopsmith Standard Saw Blade Arbor used for mounting our blades to the model 500 Mark V. To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 48,25
  Available

  Add to basket View

• Select to compare

  

  MARK V 500 REFURBISHED 1-1/4"...

  Shopsmith Standard Saw Blade Arbor used for mounting our blades to the model 500 Mark V. REFURBISHED ITEM To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 32,00
  Available

  Add to basket View

• Select to compare

  

  MARK V 510/520 1-1/4" Saw Arbor

    Shopsmith Standard Saw Blade Arbor used for mounting our blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 48,25
  Available

  Add to basket View

• Select to compare

  

  MARK V 510/520 REFURBISHED...

  RECON Shopsmith Standard Saw Blade Arbor used for mounting our blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 32,00
  Available

  Add to basket View

• Select to compare

  

  Shopsmith 13" Long Arbor Wrench...

  515979 Shopsmith 13" Long Arbor Wrench Spanner  Why struggle with adjustable spanners and catch your knuckles and fingers? You may have one but I use two and have never caught myself on the sawblade during arbor changes Strong steel extra long to keep your fingers away from the sawblade      

  £ 28,55
  Available

  Add to basket View

• Select to compare

  

  60 Tooth 30mm arbor10 inch TCT...

   If you have purchased the 30mm arbour then this blade is for you I recommend this blade for hardwood and plywood A top quality UK sourced 250mm sawblade with dimensions for the centre arbour of 30mm Kerf on this blade is 3.2mm  This saw blade is 250mm outside diameter 60Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is...

  £ 69,50
  Available

  Add to basket View

• Select to compare

  

  80 Tooth 30mm arbor 250mm TCT...

   If you have purchased the 30mm arbour then this blade is for you I recommend this blade for for worktop, panels and Perspex A top quality UK sourced 250mm sawblade with dimensions for the centre arbour of 30mm Kerf on this blade is 3.2mm  This saw blade is 250mm outside diameter 80Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as...

  £ 86,99
  Available

  Add to basket View

• Select to compare

  

  10 inch TCT Sawblade for 1¼"...

  42 tooth TCT (Tungsten Tipped Carbide) This is a pre owned Blade which will need  re-sharpening  Sold by Shopsmith prior to 2008 A previously owned quality 10 inch sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch outside diameter 42Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is...

  £ 28,00
  Available

  Add to basket View

• Select to compare

  

  Mitre Gauge Extention

  505630 Miter Gauge Extension Will not fit ER. Miter Gauge Extension Fence adds support for large work pieces. Hardwood extension provides an extra long miter gauge face for more accurate control of large work pieces. 12" x 3" with 2 holes for mounting..

  £ 30,99
  Available

  Add to basket View

• Select to compare

  

  Mitre Gauge Stop Rod

  Mitre Gauge Stop Rod NEW LOWER PRICING FOR 2022 505629 Mitre Gauge Stop Rod   Will not fit ER. Handy for cross-cutting pieces to identical length, sanding and drilling. The stop rod is used to cut several work pieces to the same length without repeated measurements..

  £ 29,95
  Available

  Add to basket View

• Select to compare

  

  20" Aluminum Miter Gauge...

  556005 20" Aluminum Miter Gauge Extension with Flip Stop The 20" Aluminum Miter Gauge Extension attaches to your miter gauge face via rear T-Slots with two bolts and knurled knobs. The adjustable stop slides to the left or right in a top-mounted T-Slot and can be flipped up or down when needed. The extension (with stop) slides left or right on the gauge...

  £ 97,99
  Available

  Add to basket View

• Select to compare

  

  Mitre Pro

   555404 Miter Pro NEW LOWER PRICING FOR 2022  The Mitre Pro gives you top-quality miters from a table saw! It's a convenient miter jig that works with your Mark V Tablesaw to cut precise 45 degree angles for perfect 90 degree corners every time.   10" and 24" extension fences provide stability when working with long piece  

  £ 176,25
  Available

  Add to basket View