> Shopsmith Products>Mk V 500

Mk V 500

Mark V 500

• Select to compare

  

  5/32" T-Handle Hex Wrench

  5/32” T-Handled Hex Wrench – The Shopsmith Toolkit    90% of the time, this T-Handled 5/32” Hex Wrench is the ONLY tool you’ll need to make most tool changes and adjustments to your Shopsmith MARK V and Special Purpose Tools.     

  £ 12,99
  Available

  Add to basket View

• Select to compare

  

  1981 Catalogue

  1981 Catalogue  Have a look through the pictures to see what was available Many of the pages show interesting plans and ideas on how to get the best from your Mark V 500

  View

• Select to compare

  

  Headstock unit Shopsmith Mark V...

  Exchange Refurbished Mark V headstock A complete headstock ready to run and give many years of service. The unit supplied will have been fully stripped and overhauled with new parts fitted where required. The unit will have been tested to comply with current Health and Safety standards

  £ 850,00
  Available

  Add to basket View

• Select to compare

  

  Saw Table Mk V 500 Part 142

  Saw Table Mk V 500 Part 142 Rear Trunion Now discontinued so no longer available as a NEW item IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice...

  £ 8,95
  

  View

• Select to compare

  

  Saw Table Mk V 500 Part 153

  Saw Table Mk V 500 Part 153 Tilt indicator plate IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the right part. Please use...

  £ 6,25
  

  View

• Select to compare

  

  500 Upper Saw Guard Assembly...

  500 Upper Saw Guard Assembly Mark V Part 177 Special shape split washer IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the...

  £ 6,88
  

  View

• Select to compare

  

  500 Upper Saw Guard Assembly...

  500 Upper Saw Guard Assembly Mark V Part 182 Anti-Kickback Pawl IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the right...

  £ 21,75
  

  View

• Select to compare

  

  500 Upper Saw Guard Assembly...

  500 Upper Saw Guard Assembly Mark V Part 183 Special shape connecting pin IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the...

  £ 15,95
  

  View

• Select to compare

  

  Lower Saw Guard Mk V 500 Part 210

  Lower Saw Guard Mk V 500 Part 210 Truss head screw   IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the right part. Please...

  £ 6,85
  Out of stock please email for updates

  Add to basket
  View

• Select to compare

  

  Shopsmith Power Coupler

  Shopsmith Power Coupler   The Shopsmith Power Coupler is made of a virtually unbreakable plastic compound. Each end mates with splined metal Hubs that attach to your Mark 7 or Mark V and special purpose tools.  

  £ 34,50
  Available

  Add to basket View

• Select to compare

  

  Saw Table Mk V 500 Part 156

  Saw Table Mk V 500 Part 156 Button head screw IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the right part. Please use the...

  £ 6,25
  

  View

• Select to compare

  

  500 Upper Saw Guard Assembly...

  500 Upper Saw Guard Assembly Mark V Part 181 Torsion Spring IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for advice in order to get the right part....

  £ 8,95
  

  View

• Select to compare

  

  Premium Retractable Casters

  Retractable Casters Premium design These premium, rugged retractable casters have been made especially for the Shopsmith Mark 7 and Mark V. Prepare to be amazed as you roll your Shopsmith effortlessly from location to location. You'll glide over basement and garage floor concrete expansion joints with ease.

  £ 214,55
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Premium Casters 3"...

  556224 Casters upgrade set of wheels Do you Wish You Could...     ...Roll Your Shopsmith Effortlessly From Location To Location With One Finger ?       Our New 3" Diameter Caster Wheels Will Make That Wish Come True !  

  £ 79,99
  Available

  Add to basket View

• Select to compare

  

  Mark 7 / Mark V Dust Cover

  These covers are custom tailored to fit your Shopsmith equipment, giving you added protection from condensation and rust, as well as dust and other workshop elements. Now, with improved breathability. All edges are double stitched. 515306 Mark 7 / Mark V Dust Cover Measurements  60" Long 28" Wide 23" deep If you count in metric get your tape out to convert

  £ 92,99
  Available

  Add to basket View

• Select to compare

  

  Mark 7 / Mark V Dust Cover EX DEMO

  515306 Mark 7 / Mark V Dust Cover Ex Demo item in "A" condition These covers are custom tailored to fit your Shopsmith equipment, giving you added protection from condensation and rust, as well as dust and other workshop elements. Now, with improved breathability. All edges are double stitched. Measurements  60" Long 28" Wide 23" deep If you count in...

  £ 65,00
  Available

  Add to basket View

• Select to compare

  

  Upgrading The Shopsmith MARK V...

  FROM SHOPSMITH & NICK ENGLER  Taking up where the instruction sheet leaves off! Not only do we give a vintage 1964 Shopsmith Mark V "Goldie" a complete makeover, we explain how to use and integrate all it's new parts into a versatile, up-to-date woodworking system.

  £ 24,99
  Available

  Add to basket View

• Select to compare

  

  Speed Increaser/Shaper/Drum...

  555474 Speed Increaser or Shaper or Drum Sander Fence Mark V 500 No longer available NEW so REFURBISHED ITEM Extremely useful fence to accurately control depth of cut in shaping. While Both the In-feed and Out-feed sides of the fence adjust independantly to cut as thin as 1/64" on this model only the outfeed side has a knob assembly. The infeed side...

  £ 165,00
  Available

  Add to basket View

• Select to compare

  

  Mark V 500 NEW Design RIP Fence...

  Enjoy Improved Workpiece Support and Control  The Model 500 Fence Upgrade Package for Older Model 500 Mark V's.    555646 Fence upgrade    Model 500 rip fence upgrade offers t-slot top surface and single lever locking mechanism. The convenient t-slot on the fence's top surface accepts all T-Slot accessories  

  £ 192,99
  Available

  Add to basket View

• Select to compare

  

  Lathe Tool Rest upgrade kit Levers

  Upgrade your existing Tool Rest arm    Adjusts quickly without and allen wrench This is a LEVERS kit and is for all Mk V  owners The arm is NOT included

  £ 44,75
  Available

  Add to basket View

• Select to compare

  

  Headstock initial service or...

  A full service is recommended to be done every two years of use and is even more important if you have left your machine standing for long periods of inactivity. If you have recently purchased your machine and are unsure of the history then please contact me for advice. Your initial service overhaul will bring your machine in line with current Health and...

  £ 120,00
  Available

  Add to basket View

• Select to compare

  

  Headstock repeat service or...

  Headstock repeat service. A full service is recommended to be done every two years of use and is even more important if you have left your machine standing for long periods of inactivity. You will qualify for this lower price if you have had your machine previously serviced by me in the last FOUR years. I now advocate the fitting of the Euro switch...

  £ 90,00
  Available

  Add to basket View

• Select to compare

  

  24 Tooth 1¼" arbor 10 inch TCT...

  A top quality UK sourced 10 inch (250mm) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 24 Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for ripping down the grain of your stock timbers. It gives a clean smooth finish ready for final sanding.  This blade runs...

  On sale!

  £ 54,95
  Available

  Add to basket View

• Select to compare

  

  48 Tooth 1¼" arbor 10 inch TCT...

  A top quality UK sourced 250mm (10 inch) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 48Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs clean and quiet, always a feature of a...

  On sale!

  £ 64,95
  Available

  Add to basket View

• Select to compare

  

  Pre-Cut Saw Insert For Model 500...

  Table Insert For Mark V 500 units only   Part 137 Saw insert The Saw Insert allows space for saw blades and helps support stock. Made of pressure-cast aluminum alloy, & has a 5/8" wide slot. Mounts into opening of table held on with 2 screws.. NO LONGER IN MANUFACTURE LAST FEW IN STOCK

  On sale!

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  Mark V 500 Dado Table Insert

   Mark V 500 Dado Table Insert             Replaces sawing insert during dadoing operations to allow space for blades and supports. Made of pressure-cast aluminum alloy with a generous 1-1/8 inch wide slot

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 500 Molder Table...

  Shopsmith Mk V 500 Molder Table Insert             A molding table insert is a requirement when performing molding operations. Made of high quality cast aluminum, they're ribbed for added strength and designed to fit flush with the table surface.   The molder table insert allows space for 1-inch wide molding knives.     Note: Not for use with ER, MR,...

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith MARK V 500 Blank Table...

  MARK V 500 Blank Table Saw Insert       Our special Table Inserts give you maximum work piece support and operator safety. Now you can create your own narrow or wide kerf slots when sawing, without dulling your saw blades. Will not fit ER, M2, M7, 510. Mark V Model 500 only.

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mark V 500 Support...

  555306Orders taken on this item with delivery arranged when in stock. The price shown is for ex stock Delivery. If you want one urgently contact me for direct shipping from the manufacturer to you.  Direct orders will incur added shipping charges   One of these is always in stock for viewing and demonstration, just give me a call.  Please read our...

  £ 460,99
  

  Pre Order onto my next consignment from Ohio if stock is zero View

• Select to compare

  

  Shopsmith Drum Sander or Shaper...

  Drum Sander or Shaper Table Insert Mk V 500 Alloy with pins Sold without pins Table insert is made of  rigid cast aluminum 2-1/4" diameter circular cutout allows the sander drum to drop below the table surface to shape edges completely and smoothly. Provision for attaching vacuum attachment for dust collection.   Note: Not for use with ER, Mark 2, or...

  £ 50,99
  Available

  Add to basket View