> UK Products>Sawblades

Sawblades

A range of UK made sawblades.

• Select to compare

  

  Sawblade Production

  An explanation of how a good sawblade compares to a cheap sawblade I strive to sell top quality products to compliment your Shopsmith. With that in mind I am very picky about who supplies my products After reading the detail below just ask yourself this question- Does my £20 sawblade go though this much care during production?

  View

• Select to compare

  

  24 Tooth 1¼" arbor 10 inch TCT...

  24 Tooth 1¼" arbor 10 inch TCT Sawblade A top quality UK sourced 10 inch (250mm) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 24 Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for ripping down the grain of your stock timbers. It gives a clean smooth finish ready...

  On sale!

  £ 59,95
  Available

  Add to basket View

• Select to compare

  

  48 Tooth 1¼" arbor 10 inch TCT...

  48 Tooth 1¼" arbor 10 inch TCT Sawblade A top quality UK sourced 250mm (10 inch) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 48Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for trimming or crosscutting as it is considered as a fine cut blade. This blade runs...

  £ 70,95
  Available

  Add to basket View

• Select to compare

  

  MARK V 510/520 5/8" Saw Arbor...

  555608 MARK V 510/520 5/8" Saw Arbor with 30mm conversion Shopsmith Saw Blade Arbor used for mounting 30mm blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 30mm centre hole diameter  NOTE: Not to be used with DADO blades This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items in stock  

  £ 61,95
  Available

  Add to basket View

• Select to compare

  

  MARK V 500 30mm conversion 5/8"...

  Shopsmith Saw Blade Arbor used for mounting 30mm blades to models Mark V 500 ONLY-------- NOT for 510 or 520 There is stock avavilable once you have confirmed your Mark V model DO NOT MAKE PAYMENT UNTIL YOU HAVE DONE THIS  To mount Blades with a 30 mm centre hole diameter  NOTE: Not to be used with DADO blades 

  £ 61,95
  Available

  Add to basket View

• Select to compare

  

  60 Tooth 30mm arbor10 inch TCT...

   If you have purchased the 30mm arbour then this blade is for you I recommend this blade for hardwood and plywood A top quality UK sourced 250mm sawblade with dimensions for the centre arbour of 30mm Kerf on this blade is 3.2mm  This saw blade is 250mm outside diameter 60Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is...

  £ 69,50
  Available

  Add to basket View

• Select to compare

  

  80 Tooth 30mm arbor 250mm TCT...

   If you have purchased the 30mm arbour then this blade is for you I recommend this blade for for worktop, panels and Perspex A top quality UK sourced 250mm sawblade with dimensions for the centre arbour of 30mm Kerf on this blade is 3.2mm  This saw blade is 250mm outside diameter 80Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as...

  £ 86,99
  Available

  Add to basket View

• Select to compare

  

  10 inch TCT Sawblade for 1¼"...

  42 tooth TCT (Tungsten Tipped Carbide) This is a pre owned Blade which will need  re-sharpening  Sold by Shopsmith prior to 2008 A previously owned quality 10 inch sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch outside diameter 42Tooth TCT (Tungsten Carbide Tip) use this for trimming or crosscutting as it is...

  £ 28,00
  Available

  Add to basket View

• Select to compare

  

  Sawblade Sharpening Service

  TCT Sawblade Sharpening Service After a lot of trial and error over the years I have now found a company who do a good job of sharpening my blades. It is sensless paying out for a good quality blade only to have it ruined by shoddy sharpening. If this has been your experience then send your blades to the company below and they will get them sharpened...

  View

• Select to compare

  

  Axcaliber TCT Circular Saw Blade...

  Woodworking SAWBLADE  SOLD AS USED item See pictures for type and condition Axcaliber TCT Circular Saw Blade 205mm dia 32 teeth 30mm bore NOT FOR SHOPSMITH A very useful item to have in your tool arsenal You can usually add small items to any standard order for NO EXTRA shipping if under two kilos Many of these items are NEW but are sold as USED Snap up...

  £ 20,00
  Available

  Add to basket View

• Select to compare

  

  Axcaliber TCT Circular Saw Blade...

  Woodworking SAWBLADE  SOLD AS USED item See pictures for type and condition Axcaliber TCT Circular Saw Blade 200mm dia 64 teeth 16mm bore NOT FOR SHOPSMITH A very useful item to have in your tool arsenal You can usually add small items to any standard order for NO EXTRA shipping if under two kilos Many of these items are NEW but are sold as USED Snap up...

  £ 20,00
  Available

  Add to basket View

• Select to compare

  

  ELU TCT Circular Saw Blade 216mm...

  Woodworking SAWBLADE  SOLD AS USED item See pictures for type and condition ELU TCT Circular Saw Blades Pack of three 216mm dia 14 teeth 30mm bore x 3 NOT FOR SHOPSMITH A very useful item to have in your tool arsenal You can usually add small items to any standard order for NO EXTRA shipping if under two kilos Many of these items are NEW but are sold as...

  £ 20,00
  Available

  Add to basket View

• Select to compare

  

  Proxxon KGS 80 chop saw

  Proxxon KGS 80 chop saw A fantastic tool if you are absorbed by PEN MAKING Woodworking tool USED item See pictures for type and condition   A very useful item to have in your tool arsenal You can usually add small items to any standard order for NO EXTRA shipping if under two kilos Many of these items are NEW but are sold as USED Snap up these Bargains...

  £ 185,00
  Available

  Add to basket View

• Select to compare

  

  Brick and Breeze block hand saw

  Woodworking tool USED item See pictures for type and condition Brick and Breeze block hand saw TCT teeth Rust prevention coating A very useful item to have in your tool arsenal You can usually add small items to any standard order for NO EXTRA shipping if under two kilos Many of these items are NEW but are sold as USED Snap up these Bargains quickly as...

  £ 18,00
  Available

  Add to basket View

• Select to compare

  

  MARK V 500 1-1/4" Saw Arbor

  505511 MARK V 500 1-1/4" Saw Arbor Shopsmith Standard Saw Blade Arbor used for mounting our blades to the model 500 Mark V. To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 48,50
  Available

  Add to basket View

• Select to compare

  

  MARK V 510/520 1-1/4" Saw Arbor

  555130 MARK V 510/520 1-1/4" Saw Arbor Shopsmith Standard Saw Blade Arbor used for mounting our blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 48,50
  Available

  Add to basket View