

VOLUME 1
Here’s a 76-minute video introduction to the Amazing Shopsmith MARK V …and the first three of its five basic functions
If you’ve been wondering whether or not the Shopsmith MARK V Multipurpose Woodworking System is for you…or have just purchased or inherited a new or used machine and would like to see it put through its paces…this great Nick Engler hosted CD / DVD is most definitely for you.
In this video, Nick will begin by introducing you to the concept behind this well-known American Legend and describe the main components of the machine and how they function together.
From this introduction, Nick will continue with in-depth discussions of…:
How to set-up and use the MARK V Table Saw
including the different blades that are available; how to mount them; positioning the Worktable; making vital adjustments; using safety devices; and working with the Miter Gauge, Rip Fence and optional CrosscutSliding Table.
How to set-up and use the MARK V Drill Press
including raising the machine into vertical position; adjusting the Worktable for drilling; installing the Drill Chuck and bits properly; using the Rip Fence and Miter Gauge for controlling the workpiece and performing repetitive operations; setting the Depth Stop; adjusting the speed and using the Telescoping Legs for added workpiece support.
How to set-up and use the Horizontal Boring Machine
including adjusting the Worktable height; using the Rip Fence as a backstop; adjusting the Depth Stop and using the Miter Gauge to ensure perpendicularity.
VOLUME 2
In this second installment of Nick Engler’s MARK V Essentials video, he covers the final two functions of this amazing machine – PLUS some important, critical maintenance procedures
Here’s Nick’s follow-up to our MARK V Essentials, Volume 1 DVD/DVD-ROM. The perfect companion for the Volume 1 edition, it’s must-have information for anyone who has recently purchased or inherited a used MARK V…or recent buyers of new machines who would like to see a machine put through its paces. In this video, Nick will cover…
Disc Sanding
with both our standard Flat and our optional Conical sanding discs. He’ll discuss using the Flat Disc at the center of the MARK V Worktable, as well as at the outside edge for both straight and convex edge sanding and how the Lower Saw Guard can be used to keep shop dust at a minimum. He’ll also introduce you to our amazing Conical Disc and the unique operations that only it can perform.
Lathe Turning
including how to set the MARK V up in Lathe mode, align its components for the best results and mount the workpiece properly.
Critical Maintenance Procedures
including cleaning & lubricating the Headstock & locks; Quill; Speed Dial; Worktable & Cariage; Way Tubes; Extension Tubes & locks; Miter Gauge; Rip Fence; Saw Guard; and Lathe Tool Rests & Posts.