1/2" Cone Cutter/Follower

555278 1/2" Cone Cutter/Follower 

1/2" Cone Cutter and Follower work great on soft and hard woods. Precision-ground, high-speed steel with extra-sharp edge for fine, smooth shaving cuts..

An additional accessory for your Shopsmith Lathe Duplicator

    Create Perfect Professional Duplicates Easily with the Lathe Duplicator  

    If you have been fearful of the lathe, this incredible accessory     could help you master many of the key techniques of proficient turning  

    The Amazing Shopsmith Lathe Duplicator Helps You Turn Precisely Matched Spindles, Bowls & Other Faceplate-Mounted Projects With Speed and Ease   

        Now you can quickly and easily make multiple spindle or faceplate turnings that match perfectly. Create chair backs, newel posts and stair railings. Turn matched sets of bowls or round gift boxes. Duplicate pieces up to 8-inches in diameter with cuts to 3-1/4-inches deep!  

         Work with flat patterns or existing turnings such as worn or broken porch spindles. A simple micro-adjustment assures cutting tip to follower tip alignments as close as 1/64-inch. Then just grasp the floating tool rest assembly (which holds the cutting & follower tips) firmly with both hands and glide  it smoothly across the worktable surface while the follower tip traces the pattern and the cutting tip does the work. Simple!  

          The two-handed grip gives you positive control of every cut. It's nearly impossible to slip and ruin a turning!  Use the follower tip when duplicating... or remove it and turn freehand without fear of gouging.  

           The rugged worktable mounts in your Mark 7 or Mark V's table carriage. Heavy steel supports clamp quickly to the Mark 7 or Mark V's upper way tubes to hold the pattern securely. Includes safety guard and 12" wide, clear chip deflector shield for added safety. Unit folds for compact storage.  

    

      Shopsmith Tools in Action    

      Watch these online videos to see this amazing tool in action    

Turning Tapers with the Lathe Duplicator     Turning Precise Diameters     Using a Boring Bar for Bowl Turning     Using a Cone Cutter to get a Smooth Surface       

Note: Live center is not included, but is recommended. Order separately  

Note: Not for use with the Shopsmith 10ER, Mark 2 or older Mark VII.