Beltsander 6 inch wide USED Maximize

Beltsander 6 inch wide USED

Beltsander USED item W (complete)

 

This is a used item in full working order. It will come with a sanding belt and original dust chute.

It also has the cast iron tilting fence

Optional extras are the  2¼" drum sander attachments and the dust chute upgrade to 2¼" chute

It has been fully tested and adjusted and will come with a six month warranty on all parts.

More details

Wendy

1 Item in stock for dispatch at this price

Warning: Last items in stock!

£ 325,00

On sale On sale!

The Shopsmith Belt Sander -- A Big, 6-inch Wide Belt and Loads of Great Features Help You Eliminate Hours of Tedious Hand Sanding!   The Shopsmith Belt Sander -- A big, 6-inch wide belt and loads of great features help you eliminate hours of tedious hand sanding     

    Shopsmith 6" Belt Sander  

    Few tools will save you more work and time than a stationary belt sander. Its straight line action removes stock quickly and easily... then smooths surfaces and edges to a glass like surface by changing to a fine grit belt.  

        What You'll Do With Your New Shopsmith Belt Sander  

    Belt sanders are the ideal tool for smoothing the surfaces and edges of     both narrow and wide boards. You'll use it to make easy work of home shop sanding jobs such as:  

  • Removing unsightly mill marks from sawn stock
  • Sanding bevels, miters and other cuts while using the table to maintain a precise angle or size
  • Contour sanding odd-shaped workpieces on the back side of the belt (which runs free without a back-up plate)
  • Sanding protruding joinery (finger laps, lap joints, mortise-and-tenons, dovetails, etc.) flush with workpiece edges or surfaces
  • Sanding small or unusually-shaped parts that may be difficult or impossible to hold for sanding with hand-held power sanders

    When you want to remove stock quickly, sand across the grain. When you want to smooth stock, sand with the grain. In fact, thanks to its     straight-line cutting action, you can produce surfaces or edges that are smooth as glass and straight as an arrow by merely changing to a fine grit belt.  

                            When you need true 90° edges, position the worktable along the side of the belt so its surface is 90° to the belt surface... then use the table as a precision rip fence-type guide.  

                            When you need precise, 2-way 90° corners, position the worktable across the belt with its surface 90° to the belt surface... then     use the table as a precision back-up to maintain the angle of the stock during sanding.  

                            When you need precise, 3-way 90° corners just use your belt sander's table slot to bring your Mark 7 / Mark V miter gauge into     the equation for even more control.  

          Loaded With Work-Saving, Results-Enhancing Benefits and Accessories  

Mount on your Shopsmith or Stand       

      As with all Shopsmith Special Purpose Tools, your belt sander offers a number of great features and accessories to help you make everything you make - better.    

Mark 7 / Mark V or Stand Mount -- Every Shopsmith Special Purpose Tool offers the option of mounting and powering it with your Shopsmith - or with its own, individual, motorized stand.    

6" x 9" Support Table --  Tilts and locks into position to control sanding angles and to act as a back-up during certain operations. It may be used across the belt, parallel to it on either side or at any angle for support when surfacing or edging stock. Your Mark 7 /Mark V's miter gauge or the Shopsmith Tenon-Master jig may be used with the table for added control.    

Automatic Belt Tensioning       

Automatic Belt Tensioning and Tracking -- Just twist the       tensioning knob until it clicks to release the tension for belt changes.Then, depress the knob release lever and everything snaps back to normal automatically. No tension settings required. Special high-crown drum helps to keep the belt on-track at all times, without the need for constant adjustments.    

Free-Running Belt on Back Side       

Free-Running Belt on Back Side -- Since the back side of the belt has no back-up plate, it will flex and give to match the external contours of workpieces.    

Built-In Dust Collection Port -- 2-1/2" dust collection port helps you capture the fine dust created by your belt sander before it gets into your shop environment.    

Auxiliary Power Shaft -- 5/8" shaft extends from the drive roller to accept the Shopsmith Drum Sander (505552). Or, use your Shopsmith 1/4" Router Chuck to hold our small drum sanders.     

External Sanding      Internal Sanding     
Specifications
Belt Size6" x 48"
Table Size6" x 9"
Table Tilt0 to 20° into belt 45° away from belt
Backup Plate6" x 16-1/32"         (14" to the left)
Bearings4 ball bearings         (2 each on driver & idler drums)
Drums(2) 3" diameter         (Drive drum rubber coated)
Speed1,150 to 1,900 rpm (recommended)
Weight36 lbs.
Video Icon      

        Shopsmith Tools in Action      

         Watch these online videos to see this amazing tool in action      

Sanding Curves and Contours       Belt Sander Fence       Belt Sander Tune-Up       Crowning a Sanding Belt           

Includes: • Belt Sander • Instruction Manual and • (1) 80-Grit Belt