> Shopsmith Products>Shaping

Shaping

Shaping - Create Beautiful Decorative Trim on Curved or Straight Edges with your Shopsmith mark V

• Select to compare

  

  Complete Cabinet Set of 6 Shaper...

  505937 Complete Cabinet Set of 6 Shaper Cutters This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items in stock This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith...

  £ 185,99
  Available

  Add to basket View

• Select to compare

  

  555503uk LED Utility Light kit

  555503uk LED Utility Light Illuminate Your View of Virtually Any Woodworking Operation These handy LED Utility Lights feature a bright ring that will flood loads of light exactly where you need it for ensuring the optimum in precision for tasks of all types. The LED Bulbs are brighter, last longer, & are less fragile to avoid unnecessary breakage....

  £ 69,95
  Available

  Add to basket View

• Select to compare

  

  LED Utility Light kit

  555522 LED Utility Light only Illuminate Your View of Virtually Any Woodworking Operation These handy LED Utility Lights feature a bright ring that will flood loads of light exactly where you need it for ensuring the optimum in precision for tasks of all types. The LED Bulbs are brighter, last longer, & are less fragile to avoid unnecessary breakage....

  £ 18,95
  Available

  Add to basket View

• Select to compare

  

  Shaper shaping

  The shaper is used with the Mark 7 or Mark V set-up in the vertical position and is best suited for shaping the edges of workpieces. This can also be achieved with your MK V in horizontal mode with the attachment of a Speed Increaser 555462 which increases the spin rate to 10,000 rpm for super fine finishes.

  £ 0,00
  Available

  Add to basket View

• Select to compare

  

  Bead Shaper Cutter Style No. 1

  505605 Bead Shaper Cutter Style No. 1   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Speed Increaser

  Shopsmith Speed Increaser LAST ONE AVAILABLE  DISCONTINUED IN 2023   Increase Your Mark V's Speed to 10,000 rpm for Routing and Shaping -with the Shopsmith Speed Increaser  ORDER NOW AND GET 3 555463 SPINDLES FREE OF CHARGE  THIS IS A POWER PRO CASUALTY

  On sale!

  £ 585,99
  Available

  Add to basket View

• Select to compare

  

  Crown Shaper Cutter Style No. 2

  505606 Crown Shaper Cutter Style No. 2   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Bead & Quarter-Round Shaper...

  505607 Bead & Quarter-Round Shaper Cutter Style No. 3   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the...

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Speed Increaser 1/2"...

  Speed Increaser 1/2" Shaper Spindle NEW LOWER PRICING An optional accessory for the Speed Increaser (555462) Normally £43.50 but Currently ON SALE so buy these while stocks last Keep your popular cutters ready mounted with an extra spindle If you want pre-mounted 1/2" shaper cutters ready for all your woodworking needs

  On sale!

  £ 27,95
  Available

  Add to basket View

• Select to compare

  

  1/4" & 1/2" Combination...

  505608 1/4" & 1/2" Combination Quarter-Round Shaper Cutter Style No. 4   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters....

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Speed Increaser 1/2"...

  1/2" Ball Bearing Shaper Spindle NEW LOWER PRICING optional accessory for the Speed Increaser (555462) Also fits into your 514631 1/2" Router Chuck   Provides improved finish cuts on both straight line and pin Routing and Shaping; burn-free results. If you want pre-mounted 1/2" shaper cutters ready for all your woodworking needs

  On sale!

  £ 58,95
  Available

  Add to basket View

• Select to compare

  

  1/2" Shopsmith Shaper Arbor

  555117 1/2" Shopsmith Shaper Arbor NEW LOWER PRICING Have Multiple Cutters Mounted and Ready-To-Go with Extra 1/2" Shaper Arbors Fine tool steel arbor secures shaper cutters and collars. Keyed washer allows safe use with right-hand or left-hand rotating shafts. Includes: Arbor and (4) Rub Collars (25/32", 1", 1-1/4" and 1-1/2").

  £ 48,95
  Available

  Add to basket View

• Select to compare

  

  Bead and Bevel Shaper Cutter...

  505613 Bead and Bevel Shaper Cutter Style No. 5   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Flute & Quarter-Roundl Shaper...

  505934 Flute & Quarter-Round Shaper Cutter Style No. 6   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the...

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Fence for Speed...

  555475 Fence for Speed Increaser/Shaper/Drum Sander -510/520 LAST ITEMS AVAILABLE INDIVIDUALLY THESE ARE NOW ONLY SOLD WITH KITS 555113 OR 555141 Extremely useful fence to accurately control depth of cut in shaping. Both the In-feed and Out-feed sides of the fence adjust independantly to cut as thin as 1/64". This item is also sold as part of a larger...

  £ 215,50
  Available

  Add to basket View

• Select to compare

  

  1" Jointer Shaper Cutter Style...

  505611 1" Jointer Shaper Cutter Style No. 7   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Cabinet Door Lip Shaper Cutter...

  555589 Cabinet Door Lip Shaper Cutter Style No. 8   This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Speed Increaser/Shaper/Drum...

  Mark V 500 555474 Speed Increaser / Shaper or Drum Sander Fence  No longer available NEW so REFURBISHED ITEM Extremely useful fence to accurately control depth of cut in shaping. While Both the In-feed and Out-feed sides of the fence adjust independantly to cut as thin as 1/64" on this model only the outfeed side has a knob assembly. The infeed side...

  £ 145,00
  Available

  Add to basket View

• Select to compare

  

  Drum Sander/Shaper Vacuum...

  555168 Drum Sander/Shaper Vacuum Attachment 555168 Drum Sander/Shaper Vacuum Attachment   The Vacuum Attachment mounts to the shaper insert of the Shopsmith Mark V Model 500 and Model 510. It helps to improve safety by keeping your hands from contacting the cutter underneath the worktable and by providing a virtually dust-free work area. Will not work on...

  £ 21,75
  Available

  Add to basket View

• Select to compare

  

  Glue Joint Shaper Cutter Style...

  555095 Glue Joint Shaper Shaper Cutter Style No. 9  This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Quarter-Round & Cove Shaper...

  505614 Quarter-Round & Cove Shaper Cutter Style No. 10  This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the...

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  3-Bead Edge Shaper Cutter Style...

  555011 3-Bead Edge Shaper Cutter Style No. 11  This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Cloverleaf Shaper Cutter Style...

  505616 Cloverleaf Shaper Cutter Style No. 12  This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Shaper Table Insert...

  Shaper Table Insert is a Must For Full Profile Shaping Pins are NOT INCLUDED   NEW LOWER PRICING     Mark 7/Mark V (model 505 510 520) table insert is made of  rigid cast aluminum, 2-1/4" diameter circular cutout to allow the shaper cutter to drop below the table surface to shape edges completely and smoothly. Two holes for screw-in starter pins.  ....

  £ 49,99
  Available

  Add to basket View

• Select to compare

  

  Tongue Shaper Cutter Style No. 13

  505610 Tongue Shaper Cutter Style No. 13 (mirror image of #14)  This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the...

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Groove Shaper Cutter Style No. 14

  505609 Groove Shaper Cutter Style No. 14 (mirror image of #13)  This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the...

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Shaper Table Insert...

  Shaper Table Insert is a Must For Full Profile Shaping WITH 2 PINS (514497 x2)   NEW LOWER PRICING       Mark 7/Mark V (model 505 510 520) table insert is made of  rigid cast aluminum, 2-1/4" diameter circular cutout to allow the shaper cutter to drop below the table surface to shape edges completely and smoothly. Two holes for screw-in starter pins.  ....

  £ 69,99
  Available

  Add to basket View

• Select to compare

  

  1/4" Groove Shaper Cutter Style...

  505612 1/4"Groove Shaper Cutter Style No. 15 This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Drum Sander or Shaper...

  Drum Sander or Shaper Table Insert Mk V 500 Alloy with pins Sold without pins NEW LOWER PRICING FOR 2022 Table insert is made of  rigid cast aluminum 2-1/4" diameter circular cutout allows the sander drum to drop below the table surface to shape edges completely and smoothly. Provision for attaching vacuum attachment for dust collection.   Note: Not for...

  £ 49,99
  Available

  Add to basket View

• Select to compare

  

  Ogee Shaper Cutter Style No. 16

  505932 Ogee Shaper Cutter Style No. 16 This range of Shaper cutter, with 3 cutting surfaces, can be used on your Mk V in pillar drill mode or in horizontal mode using your Speed Increaser, 555462 to give super smooth results  All Shopsmith shaper cutters may be used on any shaper that accepts 1/2" bored cutters. Please read the safety notice

  £ 39,50
  Available

  Add to basket View