> Shopsmith Products>Mark 7 / Mark V

Mark 7 / Mark V

• Select to compare

  New

  Shopsmith Mark V 505 and 510...

  555307MARK V 505 and 510 Support Table  Extension DIY KIT I have ONE hardware KIT available to make your own REAR EXTENTION table The price shown is for in stock Delivery. The Support Table Extension gives extra support for long work pieces.Will not fit 500 or 520. .  

  £ 200,00
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mark 7 Power Pro...

  The Latest Shopsmith Mark 7 556187 plus 556247 PowerPro Model with Pro-Fence Table System with premium casters Contact me now for a quote Build lead time in the factory is 2-4 weeks Shipping is via container so 4 weeks door to door DEPOSIT required with order  Delivery is from the manufacturer and is shipped directly to you.  The price quoted will include...

  View

• Select to compare

  

  Shopsmith Power Pro Brand New...

  The Most Exciting Shopsmith Upgrade Since the Introduction of the Mark V in 1953! Part exhange your old headstock for the new Power Pro unit and enjoy the extra power and versitility This item uses a brand new headstock with a factory installed Power Pro upgrade   I will arrange for your old headstock to be collected once your new item is delivered Orders...

  View

• Select to compare

  

  Shopsmith Power Pro Distributer...

  556189 Shopsmith Power Pro Distributer Headstock Upgrade The Most Exciting Shopsmith Upgrade Since the Introduction of the Mark V in 1953! Part exhange your old headstock for the new Power Pro unit and enjoy the extra power and versitility This item uses a reconditioned headstock OUTER CASE with a Service Centre installed Power Pro upgrade ALL THE...

  View

• Select to compare

  

  Shopsmith Mark V 505 and 510...

  555307MARK V 505 and 510 Support Table Extension Orders taken on this item with delivery arranged when in stock.The price shown is for ex stock Delivery. If you want one urgently contact me for direct shipping from the manufacturer to you.  Direct orders will incur added shipping charges   One of these is always in stock for viewing and...

  £ 460,99
  

  Pre Order onto my next consignment from Ohio if stock is zero View

• Select to compare

  

  Headstock unit Shopsmith Mark V...

  Exchange Refurbished Mark V headstock A complete headstock ready to run and give many years of service. The unit supplied will have been fully stripped and overhauled with new parts fitted where required. The unit will have been tested to comply with current Health and Safety standards

  £ 850,00
  Available

  Add to basket View

• Select to compare

  

  Headstock initial service or...

  A full service is recommended to be done every two years of use and is even more important if you have left your machine standing for long periods of inactivity. If you have recently purchased your machine and are unsure of the history then please contact me for advice. Your initial service overhaul will bring your machine in line with current Health and...

  £ 120,00
  Available

  Add to basket View

• Select to compare

  

  Bandsaw initial service or overhaul

  A full service is recommended to be done every two years of use and is even more important if you have left your machine standing for long periods of inactivity. If you have recently purchased your machine and are unsure of the history then please contact me for advice. Your initial service overhaul will bring your machine in line with current Health and...

  £ 102,00
  Available

  Add to basket View

• Select to compare

  

  Headstock repeat service or...

  Headstock repeat service. A full service is recommended to be done every two years of use and is even more important if you have left your machine standing for long periods of inactivity. You will qualify for this lower price if you have had your machine previously serviced by me in the last FOUR years. I now advocate the fitting of the Euro switch...

  £ 90,00
  Available

  Add to basket View

• Select to compare

  

  Mark V Double Tilt Base Upgrade

    Enjoy the benefits of tilting your machine left or right Tilt left for under table routing or shaping Tilt right for pillar drill and mortising mode  Please ensure you CHECK your waytube dimensions BEFORE ordering Note: Older Mark V Model 500 machines (produced before 1972) that have been upgraded to the Model 510 or 520 table system will require two...

  £ 685,50
  Available

  Add to basket View

• Select to compare

  

  Mark V 510 to 520 Upgrade 1986...

  Add a More Versatile Rip Fence With Direct-Reading Scales To Your Model 510 Shopsmith Mark V    This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510 Mark V Model 510 to 520 Pro Fence and Table System Upgrade  555982 is for machines made after...

  £ 759,99
  Available

  Add to basket View

• Select to compare

  

  Mark V 510 to 520 Upgrade Pre-1986

  Orders taken on this item with delivery arranged when in stock. If you want one urgently contact me for direct shipping from the manufacturer to you. Direct orders will incur added shipping charges Please read our Direct Sales terms for details   Mark V Model 510 to 520 Pro Fence and Table System Upgrade  order 555983 for machines made before 1986...

  £ 759,99
  Out of stock please email for updates

  Pre Order onto my next consignment from Ohio if stock is zero Add to basket
  View

• Select to compare

  

  Mark V 500 to 520 Full Upgrade Kit

  Orders taken on this item with delivery direct to you when manufactured. Price includes Import, VAT and Pallet shipping charges to the UK Shipping to your door is extra Please read our Direct Sales terms for details    Upgrade Your Mark V Model 500  With Larger Tables and the Pro Fence System            Shopsmith's Pro Fence & Table System upgrade is...

  View

• Select to compare

  

  Shopsmith Premium Casters 3"...

  556224 Casters upgrade set of wheels Do you Wish You Could...     ...Roll Your Shopsmith Effortlessly From Location To Location With One Finger ?       Our New 3" Diameter Caster Wheels Will Make That Wish Come True !  

  £ 79,99
  Available

  Add to basket View

• Select to compare

  

  Premium Retractable Casters

  Retractable Casters Premium design These premium, rugged retractable casters have been made especially for the Shopsmith Mark 7 and Mark V. Prepare to be amazed as you roll your Shopsmith effortlessly from location to location. You'll glide over basement and garage floor concrete expansion joints with ease.

  £ 214,55
  Available

  Add to basket View

• Select to compare

  

  Retractable Casters

  Shopsmith Mark 7 / Mark V555354 Standard Retractable Casters Shopsmith's retractable casters make moving your Mark 7 or Mark V around the shop an effortless snap !  

  £ 173,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Quill Twister

  Shopsmith Quill Twister Meet the All-New Shopsmith Quill Twister 556263 ...the quick, effortless way to rotate and align the flat on yourShopsmith machine quill when installing quill-mounted accessories

  £ 35,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Power Coupler

  Shopsmith Power Coupler   The Shopsmith Power Coupler is made of a virtually unbreakable plastic compound. Each end mates with splined metal Hubs that attach to your Mark 7 or Mark V and special purpose tools.  

  £ 34,50
  Available

  Add to basket View

• Select to compare

  

  Mark V Lift Assist

   555975 Mark V Lift Assist   This is the accessory many MARK V owners have been wanting for some time. As we get older, we're not as strong as we used to be...and those things that were once easy for us are now a bit more difficult. It's all a part of life. NOT suitable for POWERPRO or Mk V 520 due to the heavier weight of that unit

  On sale!

  £ 374,99
  Available

  Add to basket View

• Select to compare

  

  Mark 7 or Mark V Lift Assist...

  556200 Lift Assist for Mark 7 & Mark V's before 1972 The price shown is for ex stock Delivery.   If you have upgraded to the Power Pro headstock this is the item you require This is the accessory many MARK V owners have been wanting for some time. As we get older, we're not as strong as we used to be...and those things that were once easy for us are...

  View

• Select to compare

  

  Mark 7 & Mark V Lift Assist...

  556191 Lift Assist for Mark 7 & Mark V's after 1972 Orders taken on this item with delivery arranged when in stock. The price shown is for ex stock Delivery. If you want one urgently contact me for direct shipping from the manufacturer to you. Direct orders will incur added shipping charges One of these is always in stock for viewing and...

  View

• Select to compare

  

  Mark V Lift Assist Cylinder upgrade

  556199 PowerPro Lift Assist cylinder upgrade   Mark V Lift Assist for units purchased in the UK before 2014   If you already have a lift assist and are thinking of upgrading to the new POWERPRO Headstock you will need to upgrade your unit.

  £ 76,50
  Available

  Add to basket View

• Select to compare

  

  24 Tooth 1¼" arbor 10 inch TCT...

  A top quality UK sourced 10 inch (250mm) sawblade with imperial dimensions for the centre arbour of 1 ¼" This saw blade is 10 inch (250mm) outside diameter 24 Tooth TCT (Tungsten Carbide Tip) Kerf on this blade is 3.2mm   use this for ripping down the grain of your stock timbers. It gives a clean smooth finish ready for final sanding.  This blade runs...

  On sale!

  £ 54,95
  Available

  Add to basket View

• Select to compare

  

  Mark 7 / Mark V Dust Cover EX DEMO

  515306 Mark 7 / Mark V Dust Cover Ex Demo item in "A" condition These covers are custom tailored to fit your Shopsmith equipment, giving you added protection from condensation and rust, as well as dust and other workshop elements. Now, with improved breathability. All edges are double stitched. Measurements  60" Long 28" Wide 23" deep If you count in...

  £ 65,00
  Available

  Add to basket View

• Select to compare

  

  Mark 7 / Mark V Dust Cover

  These covers are custom tailored to fit your Shopsmith equipment, giving you added protection from condensation and rust, as well as dust and other workshop elements. Now, with improved breathability. All edges are double stitched. 515306 Mark 7 / Mark V Dust Cover Measurements  60" Long 28" Wide 23" deep If you count in metric get your tape out to convert

  £ 92,99
  Available

  Add to basket View

• Select to compare

  

  MARK V 510/520 1-1/4" Saw Arbor

    Shopsmith Standard Saw Blade Arbor used for mounting our blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  £ 49,95
  Available

  Add to basket View

• Select to compare

  

  Riving Knife For Non-Through Cuts

    The riving knives on upper saw guard systems are positioned at the back side of the saw blade and are designed to prevent the saw kerf from closing onto the teeth of the rotating blade once the cut has been made.   When this kerf closing occurs, the potential for a dangerous kickback is increased significantly. Please use this sytem when making Non...

  £ 51,50
  Available

  Add to basket View

• Select to compare

  

  MARK V 510/520 5/8" Saw Arbor...

  Shopsmith Saw Blade Arbor used for mounting 30mm blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 30mm centre hole diameter  NOTE: Not to be used with DADO blades This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items in stock  

  £ 65,95
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 505-510-520...

  Shopsmith Mk V 505-510-520 Molder Table Insert             A molding table insert is a requirement when performing molding operations. Made of high quality cast aluminum, they're ribbed for added strength and designed to fit flush with the table surface.       The molder table insert allows space for 1-inch wide molding knives.     Note: Not for use...

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  Mark 7 and MARK V 505-510-520...

  Mark 7 and MARK V 505-510-520 BlankTable Insert                 Blank Polymer Zero Clearance Table Insert --- for use when making through-cuts with your Mark 7 or Model 505, 510 or 520 Pro Fence MARK V – and you’re planning to use your Upper Saw Guard for optimal safety  

  £ 33,50
  Available

  Add to basket View