> Shopsmith Products>Upgrades

Upgrades

A listing of all the upgrades available for your Mark V to make it even more productive.

• Select to compare

  

  Shopsmith Power Pro Brand New...

  The Most Exciting Shopsmith Upgrade Since the Introduction of the Mark V in 1953! Part exhange your old headstock for the new Power Pro unit and enjoy the extra power and versitility This item uses a brand new headstock with a factory installed Power Pro upgrade   I will arrange for your old headstock to be collected once your new item is delivered Orders...

  View

• Select to compare

  

  Shopsmith Power Pro Distributer...

  556189 Shopsmith Power Pro Distributer Headstock Upgrade The Most Exciting Shopsmith Upgrade Since the Introduction of the Mark V in 1953! Part exhange your old headstock for the new Power Pro unit and enjoy the extra power and versitility This item uses a reconditioned headstock OUTER CASE with a Service Centre installed Power Pro upgrade ALL THE...

  £ 2.489,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Planer Outfeed Roller...

   514534  Planer Outfeed Roller NEW DESIGN  Planer unit Table EXPLODE Part 12A   Maintain Peak Planer Performance with Replacement Outfeed roller The original fitment design has been changed to a new rubber compound This new smooth roller has a much better grip and will last longer.  Replacing this item will cure many of your misfeed problems as the old...

  £ 114,95
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Power Pro DIY...

  556177 The Power Pro DIY upgrade The new Shopsmith Power Pro   The Most Exciting Shopsmith Upgrade Since the Introduction of the Mark V in 1953! You asked for it... With few exceptions, Shopsmith MARK V owners are some of the most satisfied power tool owners in America... and have remained so for over 57 years. This is the DIY Power Pro upgrade. Order for...

  View

• Select to compare

  

  Mark V Model 500 Lower Saw Guard...

  Mk V 500 Mark V Lower Saw Guard Upgrade This unit attaches to the Mk V 500 table leg This item is no longer in production

  £ 83,50
  Available

  Add to basket View

• Select to compare

  

  Headstock unit Shopsmith Mark V...

  Exchange Refurbished Mark V headstock A complete headstock ready to run and give many years of service. The unit supplied will have been fully stripped and overhauled with new parts fitted where required. The unit will have been tested to comply with current Health and Safety standards

  £ 800,00
  Available

  Add to basket View

• Select to compare

  

  Headstock unit Shopsmith Mark V...

  50th Anniversary Refurbished Mark V headstock H27 A complete headstock ready to run and give many years of service. The unit supplied has been fully stripped and overhauled with new parts fitted where required. The service schedule will come with this unit. The unit will have been tested to comply with current Health and Safety standards

  £ 750,00
  Available

  Add to basket View

• Select to compare

  

  Headstock unit Shopsmith Mark V...

  Individual Exchange Mark V headstock H35 A complete headstock ready to run  The unit supplied has been tested as running  

  £ 550,00
  Available

  Add to basket View

• Select to compare

  

  Mark V Double Tilt Base Upgrade

    Enjoy the benefits of tilting your machine left or right Tilt left for under table routing or shaping Tilt right for pillar drill and mortising mode  Please ensure you CHECK your waytube dimensions BEFORE ordering Note: Older Mark V Model 500 machines (produced before 1972) that have been upgraded to the Model 510 or 520 table system will require two...

  £ 629,99
  Available

  Add to basket View

• Select to compare

  

  Mark V 510 to 520 Upgrade 1986...

  Add a More Versatile Rip Fence With Direct-Reading Scales To Your Model 510 Shopsmith Mark V    This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510 Mark V Model 510 to 520 Pro Fence and Table System Upgrade  555982 is for machines made after...

  £ 699,25
  Available

  Add to basket View

• Select to compare

  

  Mark V 510 to 520 Upgrade Pre-1986

    Orders taken on this item with delivery arranged when in stock. The price shown is for ex stock Delivery. If you want one urgently contact me for direct shipping from the manufacturer to you. Direct orders will incur added shipping charges One of these is always in stock for viewing and demonstration, just give me a call. Please read our Direct Sales...

  £ 725,99
  Out of stock please email for updates

  Pre Order onto my next consignment from Ohio if stock is zero Add to basket
  View

• Select to compare

  

  Mark V 505 & 510 Rip Fence...

  556421 Mark V 505-510 Rip Fence Extension Enhance your fence system with this latest idea            This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 119,85
  

  Pre Order onto my next consignment from Ohio if stock is zero View

• Select to compare

  

  Mark V 500 to 510 Full Upgrade Kit

  Orders taken on this item with delivery direct to you when manufactured. The price shown is for Delivery direct to you. Price includes Import, VAT and Pallet shipping charges to your door One of these is always in stock for viewing and demonstration, just give me a call. Please read our Direct Sales terms for details   Enjoy Improved Workpiece Support and...

  £ 2.619,99
  Available

  Pre Order onto my next consignment from Ohio if stock is zero Add to basket View

• Select to compare

  

  Mark V 500 to 520 Full Upgrade Kit

  Orders taken on this item with delivery direct to you when manufactured. The price shown is for Delivery direct to you. Price includes Import, VAT and Pallet shipping charges to your door One of these is always in stock for viewing and demonstration, just give me a call. Please read our Direct Sales terms for details    Upgrade Your Mark V Model 500  With...

  £ 2.741,99
  Available

  Pre Order onto my next consignment from Ohio if stock is zero Add to basket View

• Select to compare

  

  Shopsmith Premium Casters 3"...

  556224 Casters upgrade set of wheels Do you Wish You Could...     ...Roll Your Shopsmith Effortlessly From Location To Location With One Finger ?       Our New 3" Diameter Caster Wheels Will Make That Wish Come True !  

  £ 79,99
  Available

  Add to basket View

• Select to compare

  

  Mark V 500 wide extention Table

  555085 MARK V 500 7½" Wide Extention Table Nearly Double the Width of Original Tables ! Extension Table Upgrade For Model 500 Mark V's Made Before 1990 Note: For Model 500 Mark V's made before 1990, not compatible with Shopsmith ER or M2 models.

  £ 119,75
  Available

  Add to basket View

• Select to compare

  

  Mark V 500 wide extention Table...

  555085 MARK V 500 7½" Wide Extention Table This used item is in Grade "A" condition Nearly Double the Width of Original Tables ! Extension Table Upgrade For Model 500 Mark V's Made Before 1990 Note: For Model 500 Mark V's made before 1990, not compatible with Shopsmith ER or M2 models.

  £ 85,00
  Available

  Add to basket View

• Select to compare

  

  Mark V 500 wide extention Table...

  555085 MARK V 500 7½" Wide Extention Table & Legs Nearly Double the Width of Original Tables ! Extension Table Upgrade For Model 500 Mark V's Made Before 1990 Note: For Model 500 Mark V's made before 1990, not compatible with Shopsmith ER or M2 models. This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items...

  £ 195,50
  Available

  Add to basket View

• Select to compare

  

  Mark 7 or Mark V 520 Rip Fence...

  556420 Mark 7/Mark V 520 Rip Fence Extension  Orders taken on this item with delivery arranged when in stock.  The price shown is for ex stock Delivery.   If you want one urgently contact me for direct shipping from the manufacturer to you.    Direct orders will incur added shipping charges     One of these is always in stock for viewing and...

  £ 141,99
  

  Pre Order onto my next consignment from Ohio if stock is zero View

• Select to compare

  

  Mark V Lift Assist

   555975 Mark V Lift Assist   This is the accessory many MARK V owners have been wanting for some time. As we get older, we're not as strong as we used to be...and those things that were once easy for us are now a bit more difficult. It's all a part of life. NOT suitable for POWERPRO or Mk V 520 due to the heavier weight of that unit

  On sale!

  £ 289,75
  Available

  Add to basket View

• Select to compare

  

  Mark 7 & Mark V Lift Assist...

  556191 Lift Assist for Mark 7 & Mark V's after 1972 Orders taken on this item with delivery arranged when in stock. The price shown is for ex stock Delivery. If you want one urgently contact me for direct shipping from the manufacturer to you. Direct orders will incur added shipping charges One of these is always in stock for viewing and...

  £ 449,99
  Out of stock please email for updates

  Add to basket
  View

• Select to compare

  

  Mark 7 or Mark V Lift Assist...

  556200 Lift Assist for Mark 7 & Mark V's before 1972 The price shown is for ex stock Delivery.   If you have upgraded to the Power Pro headstock this is the item you require This is the accessory many MARK V owners have been wanting for some time. As we get older, we're not as strong as we used to be...and those things that were once easy for us are...

  £ 499,99
  Available

  Add to basket View

• Select to compare

  

  Mark V Lift Assist Cylinder upgrade

  556199 PowerPro Lift Assist cylinder upgrade   Mark V Lift Assist for units purchased in the UK before 2014   If you already have a lift assist and are thinking of upgrading to the new POWERPRO Headstock you will need to upgrade your unit.

  £ 73,25
  Available

  Add to basket View

• Select to compare

  

  Bandsaw Table upgrade

  Bandsaw Table Retro-Fit Kit (Table Only) If you have an older bandsaw it will have a cast iron table.  Change it for the larger, lighter and rust free aluminium table. Open your horizons with all the accessories available when you have this table

  £ 184,95
  Available

  Add to basket View

• Select to compare

  

  Mark V 500 Fence Upgrade Kit

  Enjoy Improved Workpiece Support and Control  The Model 500 Fence Upgrade Package for Older Model 500 Mark V's.    555646 Fence upgrade    Model 500 rip fence upgrade offers t-slot top surface and single lever locking mechanism. The convenient t-slot on the fence's top surface accepts all T-Slot accessories  

  £ 175,99
  Available

  Add to basket View

• Select to compare

  

  ShopsmithMark V 500 Front Table...

  505626 MARK V 500 Front Table ExtensionFront Table Extension gives extra support for wide work pieces. Will not fit 510 or 520. . Attaches to the front of the Mark V Model 500 table with a single twist knob, providing an extra-long slot for the miter gauge.. 

  £ 116,55
  Available

  Add to basket View

• Select to compare

  

  Shopsmith 20" Scroll Mounting...

  Shopsmith 20" Scroll Saw Mounting Block Assembly   Experiencing blade breakage? Blades sliding out? Treat yourself to a NEW mounting Block set 

  £ 13,75
  Available

  Add to basket View

• Select to compare

  

  Featherguard installation KIT...

  Jointer Feather Guard Installation kitNote: If you don't already own these tools, you will be glad you purchased this kit. The tap size is used everywhere on your Mark V Jointer Featherguard Retro-fit Installation Kit (for 555077) Includes (1) #3 drill bit, (1) 1/4-28 tap and (1) tap handle for installing the Jointer Featherguard Retro-fit Kit...

  £ 26,65
  Available

  Add to basket View

• Select to compare

  

  Shop Deputy Mark V Upgrade

   Listed to gauge the apettite for this great idea  Please ensure you CHECK your waytube dimensions BEFORE orderingThe Shop Deputy Conversion Kit Includes: Two 26" Way Tubes • all Mounting Hardware and • Plans for building a wooden base.Shopsmith Shop Deputy Work Center Conversion Kit You'll Use It To Turn Your Old Mark V Headstock and Original Base,...

  £ 184,99
  Out of stock please email for updates

  Add to basket
  View

• Select to compare

  

  Miter Gauge Quick Clamp Assembly...

  555125 Miter Gauge Quick Clamp Assembly Parts 263-267  Please view the expolde diagram for your Part numbers  

  £ 39,95
  Available

  Add to basket View