Shopsmith Power stand for SPT Inc Parts 95-101 Maximize

Shopsmith Power stand for SPT Inc Parts 95-101

505714 Power stand for Special Purpose Tools (SPT) Inc Parts 95-101

Planer Stand Base unit

 

This item is no longer in manufacture and has been discontinued.

I have only a few items left so order now to avoid disappointment.

This will be a Special Delivery order item, please enquire for delivery time

 

More details

Pack content

1 x PRO Planer Stand 4 x Leg Brace (BLACK) for SPT Part 98

516422 PRO Planer Stand 4 x Leg Brace (BLACK) for SPT Part 98

Part 98 Special Purpose Tool Power Stand Leg Brace

This is one component of the 505714 SPT stand

Bring Extra Convenience and Mobility To Your Shopsmith Tools

Ideal on smooth finish concrete or wood floors

Why two different numbers? Due to the fixing kit supplied.

1 x Common Part Lock Washer 1/4"

115546 Lock washer Common Part 1/4"

Part 100 On SPT stand 

This is one component of the 505714 SPT stand

Bring Extra Convenience and Mobility To Your Shopsmith Tools

Ideal on smooth finish concrete or wood floors

Why two different numbers? Due to the fixing kit supplied.

1 x Common Part Square nut

514204 Square nut Common Part

Part 101 On SPT stand

UK sourced M6 metric item 

This is one component of the 505714 SPT stand

 

1 x Common Part  Pan Head Screw

514205 Common Part  Pan Head Screw

Part 99 On SPT stand

UK sourced M6 metric item 

This is one component of the 505714 SPT stand

 

 

1 x PRO Planer Stand Table top (BLACK) for SPT Part 95

514297 Planer Stand Top panel (BLACK) for SPT

Part 95 Special Purpose Tool Power Stand top

This is one component of the 505714 SPT stand

Bring Extra Convenience and Mobility To Your Shopsmith Tools

Ideal on smooth finish concrete or wood floors

Why two different numbers? Due to the fixing kit supplied.

1 x Shopsmith PRO Planer Stand CORNER LEGS for SPT set 4

50276603 PRO Planer Stand CORNER LEGS for SPT set 4

Planer Drawing EXPLODE Part 96 x 4

IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY

All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email.

You are encouraged to phone for advice in order to get the right part.

Please use the link under CONTACT US

If no stock then this will be a Special order item, please enquire for delivery time

 

505714

Availability: Small parts orders will have ONE ADMIN FEE charge added per INVOICE

£ 434,95

Power stand for Special Purpose Tools (SPT) Inc Parts 95-101

Planer Stand Base unit

 

This item is no longer in manufacture and has been discontinued.

I have only a few items left so order now to avoid disappointment.

 

If it becoming a stuggle to get your Planer on and off the Mark V then consider upgrading and turning your Planer into a stand alone PRO planer design.

Further products available to add to this item

 

Planer Pulley Retro-Kit

Planer Pulley Conversion Kit

 

 

Planer Pulley Retro-Kit helps older stand-mounted Shopsmith Planers produce smoother cuts

 

For stand-mounted Shopsmith Planers with two equal-sized pulleys

 

Increases Cutterhead speed from 3,450 rpms to 5,750 rpms � and cuts-per-inch by two-thirds � from 86 CPI to 143 CPI (at 10-feet-per-minute feed rate) for super-smooth surfaces.

 

Includes (2) steel (not aluminum) Pulleys, Belt and unbreakable ABS plastic Pulley Guard, plus all mounting hardware.

General information about the Shopsmith Planer

 Shopsmith Tools in Action

Watch this Video On Setting Planer Knives!

Setting Planer Knives

Shopsmith 12" Planers 

Shopsmith 12" Mark-Mounted Planer is an excellent choice for woodworker with limited space, a more limited budget or who only occasionally build tolerance-critical projects   

     Shopsmith 12" Planers Deliver the Precise Stock Thickness You Need    

          Shopsmith Mark-Mounted Planers Save Space In Your Shop         

      Why Do You Need a Thickness Planer?    

     There are two primary reasons for owning a thickness planer. Many more will occur to you as you use your new planer.    

      The first and foremost reason is to ensure the consistency of the thickness of the stock you're using. Few problems are more frustrating than to start assembling your cut-to-size project components, only to discover that they're not fitting together properly due to inconsistencies in thickness. Assuming that all lumber (even from the same stock) is planed down to a consistent thickness, has been the downfall of many a project.    

     The second reason is to save money by planing your own lumber to the     thickness you want. When you need thinned stock for smaller gift projects, for example, these savings can be significant. If you can find 1/4", 3/8" or 1/2" thinned stock locally, you'll pay dearly for it. But, armed with a Shopsmith Bandsaw and one of our Planers, you can resaw two or three thinner boards out of a thicker one (up to 6" wide), then plane them down to the exact thickness you need..at a big savings!    

Shopsmith Planers -- Loaded With Work-Saving, Results-Enhancing      Features    

     As with all Shopsmith Special Purpose Tools, your thickness planer offers great features to help you make everything you make -- better.    

Separate Feed Motor Won't Rob Cutterhead Power          Variable-Rate Feed Control Ensures Super-Smooth, Mirror-Finish Cuts          28" Long Table Provides Unrivaled Support         

Large 12" x 4" Capacity      handles big lumber. All the throat capacity you need to smoothly and swiftly surface boards up to a foot wide. Generous 4-inch thickness capacity turns hefty, rough-sawn timbers into smooth, finished stock.    

Plenty of Muscle to tackle your toughest  jobs. While the Mark 7/Mark V mount model will deliver up to 1-3/4 hp (or 1-1/8 hp on the Mark V)  at infinitely variable cutterhead speeds of 3,000 to 4,100 rpm... the Pro Planer comes with its own operating stand and 1-3/4 hp motor that gives you a constant, 5,750 rpm cutterhead speed.    

Separate Feed Motor won't rob cutterhead power. Both Shopsmith Planer models offer a separate feed motor that's completely independent of the cutterhead motor. As a result, you'll achieve better, more consistent planer performance since each of the two motors is dedicated entirely to its own function.    

Variable-Rate Feed Control ensures super-smooth, mirror-finish cuts. Although the feed rate ranges vary slightly between the two models, both planers allow you to slow-down or      speed-up the feed rates to produce as smooth a surface as you'd like -- at the simple twist of the feed rate dial.    

28" Long Table provides unrivaled support. The Shopsmith Planer has one of the longest tables of any 12" planers on the market today. Its rigid, durable cast construction eliminates leveling problems and ensures proper infeed and outfeed support and consistent depth-of-cut on every board.    

High-Grip Feed Rollers help prevent slippage. The serrated steel infeed roller grabs every board (even thick, 4" timbers) with a secure, non-slip grip and pushes it through the cutterhead at a constant feed rate to produce that super-smooth finish. The long-lasting, hard rubber outfeed roller then grasps the board as it exits the cutterhead, pulling it through at that same rate and completing the cut without marring or scratching the surface.    

Two Shopsmith Planer Choices -- Which is Best For You?

     Shopsmith offers a choice of planer models to fit your woodworking style.    

Shopsmith 12" Pro Planer is ideally-suited for the woodworker with a little more space and a frequent need for precisely dimensioned timber. They'll appreciate having the Pro Planer mounted on its own stand, ready to go to work.    

Shopsmith 12" Mark-Mounted Planer is an excellent choice for woodworker with limited space, a more limited budget or who only occasionally build tolerance-critical projects.    

Specifications:

SpecificationMark-Mounted PlanerPro Planer
Maximum Width Of Cut12"12"
Maximum Depth Of Cut3/32"1/8"
Maximum Stock Thickness4"4"
Minimum Stock Thickness3/32"3/32"
Cutterhead SpeedVariable: 3,000-4,100 rpmFixed: 5,750 rpm
Cutterhead Diameter3"3"
Power1-3/4 hp on Mark 7 (1-1/8 hp on Mark V)1-3/4 hp
Feed Motor Horsepower1/2 hp1/2 hp
Feed Rate (Feet/Minute)5-127-20
Electrical Requirements110V, 15 amps110V, 15 amps
Minimum Cuts-Per-Inch6272
Maximum Cuts-Per-Inch205205
Table Size12-1/2" x 28"12-1/2" x 28"
Weight64 pounds151 pounds

      Watch These Online Videos    

Pack content