> Service & Spares>Worktable & Extention Tables>Mark V 520 Worktable & Extention Table

Mark V 520 Worktable & Extention Table

Mark V 520 & Mark 7 Worktable

Mark V 520 & Mark 7 Worktable

 IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE

ALL SPARE PARTS ORDERS WILL HAVE AN ADMIN FEE ADDED TO THE TOTAL

IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY

Parts orders can only be conducted via email.

You are encouraged to email for advice in order to get the right part.

 

Please use the link under CONTACT US

More

• Select to compare

  

  Mark 7 and MARK V 505-510-520...

  555518 Mark 7 and MARK V 505-510-520 BlankTable Insert                 Blank Polymer Zero Clearance Table Insert --- for use when making through-cuts with your Mark 7 or Model 505, 510 or 520 Pro Fence MARK V – and you’re planning to use your Upper Saw Guard for optimal safety  

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 510 table insert...

  516368 Shopsmith Mk V 510 table insert for SAW (Polymer Plastic) NO LONGER IN MANUFACTURE LAST FEW IN STOCK Use this item if you need to run close to the insert edge with your sawblade. If you go too far you won't damage your sawblade teeth.

  On sale!

  £ 25,00
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 505-510-520...

  Shopsmith Mk V 505-510-520 Molder Table Insert   NEW LOWER PRICING FOR 2022       A molding table insert is a requirement when performing molding operations. Made of high quality cast aluminum, they're ribbed for added strength and designed to fit flush with the table surface.       The molder table insert allows space for 1-inch wide molding knives....

  £ 39,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith MARK V 510 Blank Table...

  MARK V 510 Blank Table Saw Insert 555501 Item D in the picture       Our special Table Inserts give you maximum work piece support and operator safety. Now you can create your own narrow or wide kerf slots when sawing, without dulling your saw blades. Will not fit ER, M2, M7, 500. Mark V Models 505 510/520 Mk 7 only.

  £ 33,50
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 510 table insert...

  51410004 Shopsmith Mk V 510 table insert for SAW (Alloy) If you have damaged your original table insert this is a new Aluminium alloy insert replacement Pre-Cut Insert (Aluminum alloy) For 505, 510, 520/Pro Fence. Will not work on the M2, M7, 500 or ER.  

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Shaper Table Insert...

  Shaper Table Insert is a Must For Full Profile Shaping Pins are NOT INCLUDED   NEW LOWER PRICING     Mark 7/Mark V (model 505 510 520) table insert is made of  rigid cast aluminum, 2-1/4" diameter circular cutout to allow the shaper cutter to drop below the table surface to shape edges completely and smoothly. Two holes for screw-in starter pins.  ....

  £ 49,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Mk V 505/510/520 table...

  555116 Shopsmith Mk V 505/510/520 table insert for Sanding (Aluminium) NEW LOWER PRICING FOR 2022 If you have damaged your original table insert this is a new Aluminium alloy insert replacement Pre-Cut Insert (Aluminum alloy) For 505, 510, 520/Pro Fence. Will not work on the M2, M7, 500 or ER.  

  £ 42,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Drum Sander Table...

  555119 Drum Sander Table Insert Mk V 505-510-520 NEW LOWER PRICING FOR 2022 Sold without pins if ordered for Drum Sanding   Table insert is made of  rigid cast aluminum 2-1/4" diameter circular cutout allows the sander drum to drop below the table surface to shape edges completely and smoothly. Provision  for attaching vacuum attachment for dust...

  £ 42,99
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Shaper Table Insert...

  Shaper Table Insert is a Must For Full Profile Shaping WITH 2 PINS (514497 x2)   NEW LOWER PRICING       Mark 7/Mark V (model 505 510 520) table insert is made of  rigid cast aluminum, 2-1/4" diameter circular cutout to allow the shaper cutter to drop below the table surface to shape edges completely and smoothly. Two holes for screw-in starter pins.  ....

  £ 69,99
  Available

  Add to basket View

• Select to compare

  

  Mark 7 / Mark V 505-510-520 Dado...

   Mark 7 / Mark V 505-510-520 Dado Table Insert             Replaces sawing insert during dadoing operations to allow space for blades and supports. Made of pressure-cast aluminum alloy with a generous 1-1/8 inch wide slot

  £ 50,99
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Floating or...

   514107 MARK V Ext or Floating Table Top 510 is Part 243 520 is Part 240     Designed to provide the ultimate stability and accuracy in table support and alignment. Bare extension table top for 505-510-520  Table front and rear fence rails to be ordered sperately depending on model Will not work on Mk V 500.

  £ 116,75
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Main Table Front...

  518488 Mark V 520  Front Rail 17½" long Part 141 NON MAGNETIC 30% discount compared to regular price !! Mark V Model 510 to 520 Pro Fence and Table System Upgrade   order 555982 for machines made after 1986            This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect...

  On sale!

  £ 94,95
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Main Table Front...

  518488 Mark V 520  Front Rail 17½" long Part 141 NON MAGNETIC 30% discount compared to regular price !! Mark V Model 510 to 520 Pro Fence and Table System Upgrade The item has been "Mis-drilled" ONLY A FEW ITEMS LIKE THIS AVAILABLE  order 555982 for machines made after 1986            This Pro Fence System has been engineered to give you even better...

  On sale!

  £ 55,00
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Main Table Rear Rail...

  518490 Mark V 520 Rear Rail 17½" long Part 143  Mark V Model 510 to 520 Pro Fence and Table System Upgrade  order 555982 for machines made after 1986              This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 81,95
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Table alignment tool...

  520align1 Mark V 520 Alignment gauge tool SHORT for extention worktables If you cannot find this item and your table alignment has moved don't panic !!          This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 6,95
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Table alignment tool...

  520align2 Mark V 520 Alignment gauge tool LONG for worktable If you cannot find this item and your table alignment has moved don't panic !!          This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 6,95
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Main-Extention &...

  518403 Mark V 520 Spacer Main Table Part 146 Extention Table Part 242 Floating Table Part 242             This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 6,95
  

  View

• Select to compare

  

  Mark V 520 Main- Extention &...

  518460 Mark V 520 Hex c/s bolt Common part for Main Table Part 145 Extention Table Part 243  Floating Table Part 243             This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 0,85
  

  View

• Select to compare

  

  Mark V 520 Front Rail for...

  522367 Mark V 520 Front Rail for Extention or Floating Table Part 244 (Non Magnetic)          This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 55,75
  Out of stock please email for updates

  Add to basket
  View

• Select to compare

  

  Mark V 520 Front Rail for...

  522367 Mark V 520 Front Rail for Extention or Floating Table Part 244 (Non Magnetic) USED PART          This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 32,50
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Rear Rail for...

  518491 Mark V 520 Rear Rail for Extention or Floating Table Part 245 USED PART  Mark V Model 510 to 520 Pro Fence and Table System Upgrade  order 555982 for machines made after 1986              This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 28,00
  Available

  Add to basket View

• Select to compare

  

  Mark V 520 Extention or Floating...

  515859 Mark V 520 Knob for Extention or Floating Table Part 246 DESIGN CHANGE             This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 7,25
  

  View

• Select to compare

  

  Mark V 520 Extention or Floating...

  515859 Mark V 520 Spring for Extention or Floating Table Part 247             This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 5,95
  

  View

• Select to compare

  

  Mark V 520 Extention or Floating...

  515294 Mark V 520 Lock Nut for Extention or Floating Table Part 248             This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your Mark V Model 510.  

  £ 1,25
  

  View

• Select to compare

  

  MARK V 510 or 520 Telescoping...

  514520 MARK V 510/520 Telescoping Leg T joint   One quick twist easily adjusts the telescoping legs for simple, accurate table height positioning. Will not work on Mk V 500.

  £ 48,95
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Connector 2...

   514439 MARK V 510/520 Connector 2 foot Tube (each)   Designed to provide the ultimate stability and accuracy in table support and alignment. Slides into 510 worktable and extension tables to help support floating extension tables. Will not work on Mk V 500.

  £ 21,99
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Pair of 5 Foot...

   521942 pair MARK V 510/520 5 Foot Connector Tubes  This listing is for a pair of these tubes These tubes are problematic for shipping please contact me   Designed to provide the ultimate stability and accuracy in table support and alignment. Slides into 510 worktable and extension tables to help support floating extension tables. Will not work on Mk V 500.

  £ 70,00
  Available

  Add to basket View

• Select to compare

  

  MARK V 510 or 520 Telescoping Leg

  514529 MARK V 510/520 Telescoping LegOne quick twist easily adjusts the telescoping legs for simple, accurate table height positioning. Will not work on Mk V 500.

  £ 46,25
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Extention table legs

  504273 Shopsmith Mark V Extention Table legs Use this item to make your own DIY router table  A Full-Featured Router Table Maximizes Your Shop Space  Just drop the twin mounting-tubes into the extension table mounts on your Mark V, add your own router table, install and adjust your telescoping legs on the opposite side and you have the foundation for a...

  £ 90,55
  Available

  Add to basket View

• Select to compare

  

  Shopsmith Worktable legs...

  514344 Shopsmith Worktable legs REFURBISHED (PAIR) Use this item to make your own DIY table platforms  Just drop the two mounting-tubes into the worktable mounts on your Mark V, add your own DIY table. This space-saving device then mounts directly on your Mark V to provide platform capabilities taking up minimal space.

  £ 45,00
  Available

  Add to basket View