505552 Shopsmith 2-1/4" Drum Sander
2-1/4" Shopsmith drum sander is 3" high with a rubber expansive drum that can be attached quickly to the spindle on your Mark 7 or Mark V, your Shopsmith Power Station... or the auxiliary spindle on your Shopsmith belt sander. Just slip the sleeve on, tighten the expansion bolt and go to work.
Note: Should always be used with the Drum Sander Table Insert see kit below.
ALSO AVAILABLE
555155 Shopsmith Drum Sanding Package
Everything You Need to Sand Inside and Outside Curves and Contours with Ease
Shopsmith 37-Piece Drum Sanding Package
The 37-Piece Shopsmith Drum Sanding Package has everything you need for sanding inside and outside curves and contours, all in one package.
Saves hours of tedious hand sanding.
Includes:
• 2-1/4" x 3" high Shopsmith Drum Sander
• 6 Assorted Sleeves
• 4 2" High Rubber Expansive Drums (in 1/2", 3/4", 1" & 1-1/2" diameters) with
• 3 Fine, 2 Medium and 1 Coarse Grit Sleeve for Each Size
• Shopsmith Drum Sanding Table Insert
• Shopsmith Drum Sander/Shaper Vacuum Attachment.
It's all here! Available in two different versions to suit your particular Mark 7 or Mark V model.
Note: Not for use with ER, Mark 2 and older style Mark VII.
don't forget your 753523 Abrasive Cleaning Stick to extend grit life
Abrasive Sanding Stick Make Your Sandpaper Last Four Times Longer !
Just hold this special stick against moving belt, disc or drum and watch as they're cleaned to as-new condition. 1-1/2" x 1-1/2" x 8" long. A real money-saver !
Maximize 
