> Top sellers

Top sellers

• Select to compare

  

  Bandsaw Blade 72 inch 1/8" 14...

  72 inch 1/8" 14 tpi 0.025 thick No nonsense good quality blades made in West Yorkshire to exacting standards. You will not be disappointed with these long lasting quality blades. Pack of two blades at this price SPECIAL SIZE FINE BLADES PLEASE USE 555374 COOL BLOCKS WITH THIS ITEM  

  View

• Select to compare

  

  Shopsmith Lathe Faceplate 6"...

  505591 6" Lathe Faceplate This item is the larger of the two faceplates available Each of these 5/16” thick cast faceplates attaches quickly to your MARK V’s spindle with a single setscrew.    

  View

• Select to compare

  

  Mark V 1/2" Precision Drill...

  Mark V 1/2" Precision Drill Chuck and Key This high-quality geared drill chuck is designed to work with your Mark 7 / Mark V... or any drill press with a 5/8" quill shaft. Easily accepts and grasps any size drill bit between .020" and 1/2"

  View

• Select to compare

  

  Abrasive Cleaning Stick

  753523 Abrasive Sanding Stick Make Your Sandpaper Last Four Times Longer !   Just hold this special stick against moving belt, disc or drum and watch as they're cleaned to as-new condition. 1-1/2" x 1-1/2" x 8" long. A real money-saver !    

  View

• Select to compare

  

  Part 133a on-off Switch Tails...

  on-off Switch Tail 125-250vac  extention wire 20amp at 125vac 10amp at 240vac It has 2 terminals 1 male 1 female.  Common replacement switch tail for many woodworking machines  Simple to connect with clearly marked terminals Rated at 10amp Meets all Health & Safety standards Many listed parts may be part of a larger KIT and are not always available...

  View

• Select to compare

  

  5/32" T-Handle Hex Wrench

  5/32” T-Handled Hex Wrench – The Shopsmith Toolkit    90% of the time, this T-Handled 5/32” Hex Wrench is the ONLY tool you’ll need to make most tool changes and adjustments to your Shopsmith MARK V and Special Purpose Tools.       

  View

• Select to compare

  

  Shopsmith Premium Casters 3"...

  556224 Casters upgrade set of wheels   Do you Wish You Could...     ...Roll Your Shopsmith Effortlessly From Location To Location With One Finger ?       Our New 3" Diameter Caster Wheels Will Make That Wish Come True !  

  View

• Select to compare

  

  Shopsmith Headstock upper drive...

  503570 Shopsmith Headstock upper drive hub 4 spline This is a 4 spline Hub which attaches to your Headstock and drives your Shopsmith Power Coupler 503570 is the longer of the two hubs which came standard on your Mk V  I

  View

• Select to compare

  

  Lathe Live cup Centre with No 2...

                         505602 Live cup centre center  Lathe Live Center provides for smooth, friction-free turning without messy lubricants Premier-quality Lathe Live Center features precision ball bearing construction for friction-free tip rotation without the need for beeswax or similar lubricants. 501430 for a replaceable tip  514704 for an extention...

  View

• Select to compare

  

  Part 84 Headstock Speed control...

  Part 84 Headstock Speed control handle (inc Part 85) Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Spare Key for Mark V Precision...

  Spare Key for Mark V Precision Drill Chuck if you have lost yours there is no need to struggle without one at this low price Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  ITEM B Coupler

  515430 ITEM B Coupler to join two hoses together

  View

• Select to compare

  

  Common Part Hex screw Pack of 5

  Common Part Hex screw Pack of 5 MSL (Martins Supplies Ltd) Dog tip Allen setscrews for arbors  Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US  

  View

• Select to compare

  

  Common Part 1" Bolt 1/4" dia

  515112 Common Part 1/4" x 1" Bolt Part fits into 555911 sliding Tee Nuts Bring Extra Convenience and Mobility To Your Shopsmith Tools  

  View

• Select to compare

  

  Shopsmith Ceramic Velcro backed...

  Ceramic Velcro backed Coarse 80 grit Pack of 4 disks NEW LOWER PRICING Fast-Cutting - Long-Lasting - Non-Clogging “These are clearly the carbide saw blades of abrasive discs!” --- Jim McCann (Shopsmith's resident woodworking expert)

  View

• Select to compare

  

  Adjustable Stop Collar complete...

  Shopsmith Adjustable Stop Collar Get Micro-Adjustment Convenience and Ensured Repeatability with Shopsmith's Adjustable Stop Collar   This is the COMPLETE STOP COLLAR with the printed scales  This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items in stock

  View

• Select to compare

  

  Riving Knife For Non-Through Cuts

  556223 Riving Knife For Non-Through Cuts The riving knives on upper saw guard systems are positioned at the back side of the saw blade and are designed to prevent the saw kerf from closing onto the teeth of the rotating blade once the cut has been made.   When this kerf closing occurs, the potential for a dangerous kickback is increased significantly....

  View

• Select to compare

  

  Shopsmith Power Coupler and hubs

  555124 Shopsmith Power Coupler kit The Shopsmith Power Coupler is made of a virtually unbreakable plastic compound. Each end mates with splined metal Hubs that attach to your Mark 7 or Mark V and special purpose tools which are included with this kit item. Comes with 2 X 4 splined hubs for the headstock, one each for upper and lower connection  PLUS ONE...

  View

• Select to compare

  

  Bandsaw Part 79 Hex Socket Head...

  Bandsaw Part 79 Hex Socket Head Screw Mark V 510 Saw Table insert also uses 2 of these screws Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Part 55 Headstock Gilmer belt...

  Part 55 Headstock Gilmer Belt (upper) Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  515556 Headstock Control Sheave...

    515556 Headstock Control Sheave Assembly (incl 110-112) Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  MARK V 510/520 1-1/4" Saw Arbor

  555130 MARK V 510/520 1-1/4" Saw Arbor Shopsmith Standard Saw Blade Arbor used for mounting our blades to models Mark 7, Mark V 505-510-520 To mount Blades with a 1¼" centre hole diameter   1-5/8" overall length with a 5/8" collar for mounting to the Mark V.. .

  View

• Select to compare

  

  Miter Slot Sliding T-Nut INDIVIDUAL

  555916 Sliding T-Nuts hold fixtures to worktable surface or our T-Slot Track INDIVIDUAL but DISCOUNT on Pack of 4 @ £35 Special Components for Building Shop-Made Jigs & Fixtures 555916 Nuts slide into T-Slot Track, or MARK V worktable, Rip Fence or accessory slots. Each features a 3/8-16 threaded center hole and two blank outer holes. Center accepts...

  View

• Select to compare

  

  2-1/4" x 3" Assorted Garnet...

    Garnet sanding sleeves for the Shopsmith drum sander. Sharp, tough garnet abrasive cuts smoothly and "wears like iron".   Includes: Six Sleeves Per Package

  View

• Select to compare

  

  ½ inch Router Chuck

  514631 1/2" Router Chuck NEW LOWER PRICING Chuck withstands the side-thrust typically accompanying routing operations. Precision-machined from fine tool steel for exceptional durability. Two Set-screws hold virtually any bit or attachment securely. Fits 1/2" shank bits only!

  View

• Select to compare

  

  Lathe Tool Rest upgrade kit for...

  514264 is the complete unit, new casting and new design levers   Adjusts quickly without and allen wrench This is a complete top end kit Toolrest arm with new levers    

  View

• Select to compare

  

  Dust Collector Premium Clear...

  10 foot Dust Collection Premium Clear Hose      NEW LOWER PRICING 10' x 2-1/2" Clear Crush-Proof Dust Collection Hose. Spot clogs in a flash. Step on it without consequences. Hose comes complete with end fittings.

  View

• Select to compare

  

  ¼ inch Router Chuck

  514632 1/4" Router Chuck NEW LOWER PRICING Chuck withstands the side-thrust typically accompanying routing operations. Precision-machined from fine tool steel for exceptional durability. Two Set-screws hold virtually any bit or attachment securely. Fits 1/4" shank bits only!

  View

• Select to compare

  

  Bandsaw THIN Blade 72 inch 1/4"...

  72 inch 1/4" 14 tpi 0.014 super-thin No nonsense good quality blades made in West Yorkshire to exacting standards. You will not be disappointed with these long lasting quality blades. Pack of two blades at this price  

  View

• Select to compare

  

  3 Lever Drill Press Quill Handle

  3 Lever Drill Press Quill Handle (Not for 10er) NEW LOWER PRICING 3-Lever Drill Press Quill Handle for More Leverage, Control and Convenience  

  View