> Top sellers

Top sellers

• Select to compare

  

  Shopsmith Planer Blades Knives...

   505982 Planer Blades or Knives Maintain Peak Planer Performance with Replacement Planer Knives  Shopsmith Planer blades come as a set of three unlike other Planers which only have two blades per cutter block. The cutting edges of these high-quality planer blades are made of hardened M-2 steel, laminated to a low carbon steel backup for added durability....

  View

• Select to compare

  

  Part 72 Headstock Tinnerman Clip

  523218 was 501656 Part 72 Headstock Tinnerman Clip Pack of 4 Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  MARK V 510 Table Chrome tube...

   514101 MARK V 510 Tables Chrome tube spacer Part 146 or 245 Main & Floating Shaped tube spacer  IF THE ITEM IS PRICED THERE IS USUALLY STOCK AVAILABLE IF THERE IS NO CART AVAILABLE THE FOLLOWING WILL APPLY All specialist parts orders have an admin fee in addition to the parts price and can only be conducted via email. You are encouraged to phone for...

  View

• Select to compare

  

  MARK V 510 Table Chrome tube...

   515294 MARK V 510 Table Chrome tube Locknut Part 142 or 248 Main & Floating Special locknut Common Part to Worktable Part 142 Common Part to Floating Table Part 248  Designed to provide the ultimate stability and accuracy in table support and alignment. Extension table top Parts for 505-510 Table front and rear fence rails to be ordered sperately...

  View

• Select to compare

  

  Shopsmith Arbor for molder or...

  505506 5/8" Molder / Dado Arbor 505506 Abor for Dado & Molder Here's a great all-around arbor for use with dado blades or the Shopsmith Molder Head. Includes a 3-1/8" long 5/8" diameter threaded shaft, two steel washers, a 3/4" thick spacer, a locking tongue-washer and a hex nut. Fits Mark 7 and all Mark V models.

  View

• Select to compare

  

  Shopsmith Planer Outfeed Roller...

   514534  Planer Outfeed Roller Ohio original stock all now SOLD BUT !! NEW DESIGN COMING SOON  Planer unit Table EXPLODE Part 12A   Maintain Peak Planer Performance with Replacement Outfeed roller The original fitment design has been changed to a new rubber compound This new smooth roller has a much better grip and will last longer.  Replacing this item...

  View

• Select to compare

  

  MARK V Critical Alignments DVD

  FROM SHOPSMITH & NICK ENGLER  This fantastic video shows you, step-by-step how to align your Mark V's major components to achieve the very best results. No more fiddling around or guesswork! (68 minutes)

  View

• Select to compare

  

  Replacement Jointer blades...

  505640 Jointer blades Knives Set of 3  Set of 3 Replacement Jointer hardened steel knives, precision match-ground to Shopsmith's exacting requirements. Our rigid quality control standards ensure that every knife blade will be exactly the same size, with the same precision edge bevel to guarantee accurate cuts, even if used in conjunction with old blades!...

  View

• Select to compare

  

  Shopsmith headstock Lower Drive...

  503738 Shopsmith headstock Lower Drive Hub 4 spline This attaches to the headstock idler shaft (lower one) Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Headstock Electric Motor Rewind...

  Headstock Electric motor rewind or repair  This item is the basic 240 volt motor rewind service It is only viable for Emerson units as spares are no longer available for the A.O Smith motors If your motor has failed it can often be repaired provided it has not caught fire Send your motor to me and I will remove the spring and sheaves to determine if it is...

  View

• Select to compare

  

  Part 97 Headstock Pan Head Screw

  Part 97 Headstock Pan Head Screw Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Part 124 Headstock Electric...

  Part 124  Headstock  Electric motor sheave spacer  Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Part 84 Headstock Speed control...

  Part 84 Headstock Speed control handle USED ITEM  (inc new Part 85) Fully working item available at half the price of a new one As customers upgrade to the Power Pro these items are no longer required so can be recycled to you. Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are...

  View

• Select to compare

  

  MARK V 510 or 520 Telescoping...

  514520 MARK V 510/520 Telescoping Leg T joint (original design) The stock offered is NOT the poor design latest offering   One quick twist easily adjusts the telescoping legs for simple, accurate table height positioning. Will not work on Mk V 500. Many listed parts may be part of a larger KIT and are not always available individually With all specialist...

  View

• Select to compare

  

  Dust Collector Premium Clear...

  16 Foot Dust Coll Premium Clear Hose NEW LOWER PRICING 16' x 2-1/2" Clear Crush-Proof Dust Collection Hose. Spot clogs in a flash. Step on it without consequences. Hose comes complete with end fittings.

  View

• Select to compare

  

  5/8" Accessory Hub for Jointer,...

  503740 Shopsmith Accessory drive hub 5 spline This is a 5 spline Hub which attaches to your Accessory (for Bandsaw, Belt Sander, Planer, Strip Sander ) and is driven by your Shopsmith Power Coupler 503740 is the 5/8" Accessory Hub (for Bandsaw, Belt Sander, Planer, Strip Sander) Many listed parts may be part of a larger KIT and are not always available...

  View

• Select to compare

  

  Part 85 Headstock Speed control...

  Part 85 Headstock Speed control handle allen screw Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Shopsmith Mark V Help Kit

  515325 Shopsmith Mark V Help Kit Our Help Kit Keeps You in Business Through the Thick & Thin of Workshop Problems ! Box includes 515325 61-Piece Shopsmith Help Kit Alignments leaflet T-Handle- Minwax- oil pen-cleaner rags Shopsmith Help Kit Keeps Your Mark Vin Tip-Top Running Condition andProvides Back-Ups for Important Setscrewsthat Disappear Into...

  View

• Select to compare

  

  Miter Slot Sliding T-Nuts pack of 4

  555916 Sliding T-Nuts hold fixtures to worktable surface or our T-Slot Track ALL SOLD PACK OF 4 Special Components for Building Shop-Made Jigs & Fixtures 555916 Nuts slide into T-Slot Track, or MARK V worktable, Rip Fence or accessory slots. Each features a 3/8-16 threaded center hole and two blank outer holes. Center accepts (555906) Star Knobs or...

  View

• Select to compare

  

  Shopsmith Sharpening Guide...

  555193-B5 Shopsmith Sharpening Guide Package This used sharpening guide kit comes with GUIDE-steel disk-extra  glue on disks ONLY ONE OF THESE Get Super-Sharp Lathe and Bench Chisels with Your Shopsmith Sharpening Guide   The Sharpening Guide is lightweight, yet extremely durable. In addition to the preset angles, you have adjustable angle settings that...

  View

• Select to compare

  

  Lathe Tool Rest upgrade kit Levers

  521765 Levers kit Upgrade your existing Tool Rest arm  Adjusts quickly without and allen wrench This is a LEVERS kit and is for all Mk V  owners The arm is NOT included  

  View

• Select to compare

  

  USED/REFURB goods VAT status as...

  An explanation of VAT in relation to USED GOODS The VAT element charged on ALL USED GOODS sales is NON REFUNDABLE from Customs & Excise This also applies to USED items which have been REFURBISHED  

  View

• Select to compare

  

  Part 50 Headstock Right Hand...

  Part 50 Headstock Right Hand Wedge Lock (Furthest from the handle) This item is now part of a KIT assembly  

  View

• Select to compare

  

  Part 130a USED Shopsmith...

  Part 130a USED 515656 Shopsmith ORIGINAL On/Off Switch TOGGLE KEY ONLY If you have the older style switch with the removable TOGGLE KEY and have lost it then don't panic I can help with a used replacement These switch types do not conform to current Health & Safety standards and will be replaced during a service   This will include Mark V headstocks,...

  View

• Select to compare

  

  504198 Headstock Speed Control...

  504198 Headstock Speed Control Assembly (incl 86-96) Refurbished On some items I may have reconditioned assemblies available. Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are encouraged to email for assistance in order to get the right part. Please use the link under CONTACT US

  View

• Select to compare

  

  Shopsmith Safety Feather Board...

  518215 FeatherBoard Suitable for Mark 7 and Mark V 500 510 and 520 models Award-Winning Shopsmith Safety Kit Keeps Hands Out of Harm's Way C: Feather Board The feather board is used to press stock against the rip fence or the table.

  View

• Select to compare

  

  Shopsmith Exclusive Conical...

  555477 for the complete Shopsmith Conical Disk system A pack of abrasives are included with this kit   Achieve Amazing Sanding and Sharpening Results with Shopsmith's Exclusive Conical Sanding Disc This kit may show on your order as "OUT OF STOCK" as it will be assembled from multiple items in stock

  View

• Select to compare

  

  Mark 7 / Mark V 505-510-520 Dado...

   Mark 7 / Mark V 505-510-520 Dado Table Insert            Replaces sawing insert during dadoing operations to allow space for blades and supports. Made of pressure-cast aluminum alloy with a generous 1-1/8 inch wide slot Many listed parts may be part of a larger KIT and are not always available individually With all specialist parts orders  You are...

  View

• Select to compare

  

  ITEM C Reducer connect 2-1/2"...

   300007 Item C  Reducer for DC 3300 Sorry to say that this item is DISCONTINUED once current stock is gone When there are no NEW ones available don't forget to try our USED listings lets you connect 2-1/2" and 1-1/4" diameter hoses together. Allows use of 1-1/4" diameter hoses with small tools. Large end, female - small end male.

  View

• Select to compare

  

  ITEM D 2-1/2" Elbow

  514521 ITEM D 2-1/2" Elbow  Designed for use on machines with side-mounted outlets to relieve hose strain. Male on one end, femail on the other.

  View