555435 and full kit 555477

Shopsmith Exclusive Conical Sanding Disc Kit

Shopsmith Conical Disk system with 555434 abrasive pack included

Achieve Amazing Sanding and Sharpening Results with Shopsmith's Exclusive Conical Sanding Di    

Get Super-Smooth, Swirl-Free Sanding Results On the Most Troublesome Edges and Surfaces With the Remarkable Shopsmith Conical Sanding Disc

• Joint Highly Figured Woods Without Tearing or Chipping
• Produce Glue-Quality Edges on Sheet Goods
• Shave End Grains to Length with Glass-Smooth Results
• Achieve Superior Sharpening Results on Planer and Jointer Knives

This strange-looking disc will help you produce astonishing sanding results on workpiece surfaces and edges up to 4" wide. There's nothing else like it !

Here's how it works

The steel disc is made with a 4° tapered, cone-like shape. During use, your Mark 7 or Mark V's worktable is tilted to that same 4° angle and your rip fence or miter gauge is used as a guide to keep the stock moving in a straight line.

As the stock moves past the disc, a vertical band (about 1/4" wide) is created where the full workpiece edge (up to 4" tall) is in contact with the abrasives. Within this band, the abrasives and the workpiece edge move parallel with one another, and in opposing directions, delivering straight-line, swirl-free abrasion.

Achieve a Glass-Smooth, Glue Quality Finish on the Most Difficult Edges

No edge is too difficult. Unlike your jointer, the conical disc will shave the edges of highly figured birdseye or Burl woods without tearing or chipping. Where plywood, particleboard, MDF and laminate-covered composites will eat-up jointer knives, they're no problem for the conical disc!

Remove up to 1/8" In a Single Pass !

Where a 1/8" jointer pass across composites or figured woods is almost certain to produce poor results, not so with the conical disc! For proof, just grab a piece of figured wood or composite material... make your set-up for a 1/8" pass... follow all operational and safety instructions and shove it through. You'll be amazed!

Required for the Planer/Jointer Knife Sharpener

The conical disc is the required abrasive tool for use with Shopsmith's Planer/Jointer Knife Sharpener This easy-to-use sharpener makes quick work of sanding out nicks in your jointer or planer blades, eliminating the expense of having them professionally sharpened.

Best Value - Conical Sanding Disc Package

The conical sanding disc package includes the conical disc (item 555435) • (1) 50 grit disc • (1) 80 grit disc and • (1) 150 grit disc. A great package to get started with this amazing accessory.

Heavy, 12" diameter steel sanding disc features a precision steel arbor that is carefully attached to eliminate bothersome run-out and wobble.

Just install the sandpaper disc of your choice, slip the arbor onto your Mark 7 or Mark V (or Power Station) spindle and go to work.

don't forget your 753523 Abrasive Cleaning Stick to extend grit life

Abrasive Sanding Stick Make Your Sandpaper Last Four Times Longer !

Just hold this special stick against moving belt, disc or drum and watch as they're cleaned to as-new condition. 1-1/2" x 1-1/2" x 8" long. A real money-saver !