Mitre Gauge and accessories

Shopsmith’s Miter Gauge and Accessories deliver precision, safety and repeatability

Making precision saw cuts – guiding workpieces precisely through Molding, Dadoing, Shaping & Routing operations – and controlling your stock during Sanding are all jobs that require the help of a reliable, accurate Miter Gauge…and Shopsmith’s Gauge and its related Accessories are ready to fill those needs for you.

Item (A) 505700 Shopsmith Miter Gauge (without Safety Grip)

forms the basis for this complete system of work-holding and guiding devices. It offers a built-in scale that reads from “0” to 300left and right an adjustable “Zeroing” pointer that lets you measure down to 10 increments adjustable auto-stops at “0” and 450 in both directions…and a large, Knurled Knob to lock the Gauge into position. A 1/4” hole runs through the face (left-to-right) for inserting the optional Stop Rod (D).

Item (B) 505625 Shopsmith Miter Gauge Safety Grip

…attaches to the Miter Gauge with a single screw and the top screw-in post. One pound of pressure on the Grip exerts five pounds of holding pressure between the Safety Grip pad and the top of the Miter Bar to keep the stock from slipping during the cut. Quick-release Knob adjusts rapidly for stock up to 4-1/4” thick. 
The Miter Gauge Package…includes the Miter Gauge (A) and the Safety Grip (B).

Item (C) 505630 Hardwood Miter Gauge Extension

…2-7/8” x 12” hard maple Extension comes with two mounting bolts and two knurled locking knobs and makes an excellent choice for providing additional workpiece support during many woodworking operations. 
The Miter Gauge Stop Rod (D)…adjusts to make repetitive crosscuts up to 19-1/4” from the saw blade. Includes two setscrews for attaching to Miter Gauge.

Item (D) 505629 Miter Gauge Stop Rod

…mounts quickly and easily to the face of your Shopsmith Miter Gauge with two mounting bolts and Knurled Locking Knobs. Stop Block (included) adjusts to make repetitive crosscuts up to 24” long.

Item (E) 555429 24” Aluminum Miter Gauge Extension

 …mounts quickly and easily to the face of your Shopsmith Miter Gauge with two mounting bolts and Knurled Locking Knobs. Stop Block (included) adjusts to make repetitive crosscuts up to 24” long.

Item (F) 556005 20” Aluminum Miter Gauge Extension (with Flip Stop)

…attaches to your Miter Gauge Face via rear T-Slots with two bolts and Knurled Knobs. The adjustable Stop slides to the left or right in a top-mounted T-Slot and can be flipped up or down when needed. The Extension (with Stop) slides left or right on the Gauge face to allow repetitive cut-offs up to 20” long.

Item (G) 516619 Sliding Table Miter Bar (Models 505, 510, 520 – with T-Slot Washer)

…are made to fit all Model MARK V Work Tables, Shopsmith aluminum Bandsaw Tables and T-Slotted Router Tables. Item G is made to fit Model 505, 510, 520 MARK Vs and includes removable T-Slot Washer.

Item (H) 516525 Sliding Table Miter Bar (Model 500 only – without T-Slot Washer)

…are made to fit all Model MARK V Work Tables, Shopsmith aluminum Bandsaw Tables and T-Slotted Router Tables. Item H is made to fit Model 500 MARK Vs and does NOT include T-Slot Washer.

Item (I) 555895 Shopsmith Miter Bar for Jigs & Fixtures (1)

…includes steel Miter Bar with T-Slot washer to prevent accidental lift-out and mounting holes with counterbores for three 1/4-20 by 1/2" long buttonhead screws (included). Also includes three mating 1/4-20 Threaded Inserts for attaching Miter Bar to Jig or Fixture and a Hex Key for installing Threaded Inserts.

Always make Workshop Safety Your Number One Priority

Safety is a frame of mind, and should be an important part of everything we use or do. 

The people who don't become victims are those who accept the possibilities and prepare for them. Woodworking safety requires good common sense.