With the MiterSet Standard, just place one pin in the zero hole and the other in the hole for the desired angle. The holes are clearly labeled with large, easy-to-read numbers giving the angle at every 5 degrees. For angles that are not a multiple of 5 degrees, you'll use the included detent bar to add or subtract up to 2 ½ degrees, in ½ degree increments. Then, loosen your miter gauge lock. Place your miter gauge bar in the MiterSet slot (which was made specially for an accurate fit of your Shopsmith miter gauge bar). Slide your miter gauge against the pins, and then relock your miter gauge. That quickly, your miter gauge will be flawlessly set to the angle you need for your project.

Now You're Ready to Cut Some Precise Angles Quickly & Accurately!

Using the MiterSet Segments is even one step easier. Normally, when cutting segments, you'd have to calculate the angles. Or, maybe you would need to find your look-up chart to determine the angle you need based on the number of sides in your project. The MiterSet Segment jig eliminates the need for these tedious steps, making it effortless.

Here's How it Works.

That's it, the MiterSet has selected and set the correct angle. All that is left to do, is again to place your miter gauge in the slot and slide the miter face against the pins to set the exact angle.

You save the frustration, trial-and-error, and wasted wood that comes with a conventional approach.